A fully assembled RC model of the monster truck category Traxxas Big Foot 4WD BL-2S in 1:10 scale with 4WD all-wheel drive in a special limited edition 50th Anniversary, which, compared to the standard Bigfoot model, includes a designer body and wheels in gold chrome. Additionally, the package includes a 7.4 V 3000 mAh LiPo battery with a USB-C charger.
The car is powered by a Traxxas BL-2s 3300kV brushless motor. The model has a maximum speed of up to 56 km/h. The car is equipped with a clipless body and durable Extreme Heavy Duty components. The package includes a Traxxas TQ 2.4GHz steering transmitter.
The chassis is based on the Stampede model and retains the best of it, including modular construction, top-of-the-line suspension geometry, friction clutch drivetrain, axle differentials, and adds factory-installed Wheelie wheels. The wheelbase has been extended to 295 mm for greater stability. The battery compartment now also accepts flat 7-cell NiMH batteries.
The controller with three driving modes guarantees fun for adults and children, thanks to the possibility of limiting the power to 50%. Control is provided by a Taraxxas TQ 2.4GHz transmitter with precise steering mechanics. Of course, a wide range of tuning and spare parts is available.
Features:
- limited edition Bigfoot 50th Anniversary,
- designer body, wheels and bumpers in gold chrome,
- 2S LiPo 3000mAh power battery and USB-C charger,
- fully assembled RC monster truck in 1:10 scale,
- factory installed Extreme Heavy Duty components,
- permanent all-wheel drive 4WD,
- chassis with a low center of gravity and modular design,
- clipless bodywork,
- extended chassis,
- more durable suspension arms,
- metal differential gears,
- adjustable friction clutch,
- modular chassis design for easy maintenance and setup,
- rear wheels Wheelie,
- adjustable oil shock absorbers with X-ring seals,
- easy replacement of the drive battery,
- Terra Groove tires.
Note: Please refer to the user manual for water resistance specifications. For tips and tricks on wet operation, please visit the blog .
Brushless motor
The AC drive increases maximum speed and acceleration by up to 60% compared to other DC motor drives. Improved efficiency, high-speed ball bearings and an internal cooling fan provide a long motor life.
Extreme Heavy Duty Kit Installed
The factory-installed Extreme Heavy Duty suspension and drivetrain kit is made from the most durable materials.
Stapleless bodywork
The unique body mounting system using lugs in the wheel arches allows for quick and easy battery replacement and a clean look for the model. Unlike traditional clip-on posts, the body fits over a much larger area to the clip-less mount, so it won't crack.
Modular construction
Thanks to the modular design, the chassis can be easily disassembled into individual elements using just a screwdriver. Within a minute, you have access to all important components, model settings and service operations.
Battery compartment
The battery is mounted deep in the chassis, which lowers the center of gravity. A latch system ensures easy and quick battery installation and removal. The chassis extension has allowed the battery bed to be redesigned, which now accommodates long, 157mm sets.
Oil shock absorbers
Ultra Shock long-stroke oil shock absorbers are designed to absorb every impact. Double X-ring seals ensure smooth operation without oil leakage. The characteristics of the shock absorbers can be changed by pre-tensioning the springs, replacing them or changing the oil viscosity.
Long arm stroke
The long arm stroke absorbs even sharp impacts and improves the model's handling, ensuring precise and quick steering response in every situation.
More durable suspension arms
In addition to the Extreme Heavy Duty kit, the model is also equipped with stronger suspension arms.
Precision control
The front wheel steering mechanism uses the Dula-Bell-Crank system, which ensures precise operation of the linkages to the wheels. The steering has an integrated servo-saver, which absorbs shocks from the wheels and protects the power steering against overload.
Body bracket
The body is held firmly in place thanks to the latch system. Even if the model is in somersaults, the body will not come loose from the model.
Wheelie wheels
Thanks to the rear bar with Wheelie wheels, you can enjoy driving on the rear wheels. The bar also serves as a handle for carrying the model.
Robust gears
The 32DP gear module is commonly used on larger and heavier models. The gears are also sized for an upgrade to the even more powerful VLX-3s drive.
Metal differentials
The model is equipped with high-quality metal-geared differentials that are fully prepared for the power of the AC drive. The differentials can be tuned for specific operating conditions by changing the oil viscosity.
Ball bearings
The chassis is equipped with sealed ball bearings that ensure smooth operation, extend the life of the model, and simplify maintenance.
Terra Groove tires
The unique Terra Groove tire rubber compound has high grip on a wide range of surfaces, including dirt, grass, concrete and rocky surfaces.
Traxxas 3300kV brushless motor
The Traxxas 3300kV brushless motor provides the ideal and affordable drive for 1:10 models. The motor features a Quick Connect connector for easy wiring. Other features include:
- integrated cooling fan,
- high-speed ball bearings,
- great acceleration,
- efficient operation for longer driving time.
Electronic controller BL-2s
Waterproof electronic brushless controller BL-2s with three driving modes, support for 2S LiPo batteries and easy control with the EZ-Set button. The controller is equipped with a training mode that limits full throttle to 50%.
Thanks to this, novice drivers or children can gradually get acquainted with the features of the model and prepare for the full performance of the car. Thermal protection, protection against underdischarge of LiPo batteries, gold-plated connectors, simple control, intuitive signaling with a two-color LED and a powerful cooler, which can be supplemented with an optional fan (not included in the package). BL-2s controller modes:
- Sport: Default mode, forward driving, braking and reverse driving are possible.
- Race: A mode suitable for racing. Forward and brake are possible; reverse is not available.
- Training: A mode suitable for children or novice riders. Forward travel with a 50% power limit, braking and reverse travel with a 50% power limit are possible.
RC kit Traxxas TQ 2.4GHz
The model is controlled via a 2-channel Traxxas TQ 2.4GHz steering transmitter. The transmitter is powered by only 4 AA batteries. There is a rotary knob on the transmitter that trims the steering (the model runs straight when the steering wheel is in the center position). The battery status in the transmitter is indicated by an LED. The transmitter can be set to reverse on the throttle and steering channels.
Traxxas TQ 2.4GHz receiver
The Traxxas TQ 2.4GHz 3-channel receiver ensures safe, drop-free control. Easy one-button pairing and LED status indication.
Package contents
The package contains a fully assembled 1:10 scale Traxxas Bigfoot BL-2s 4WD Classic RC car model with installed components: Traxxas BL-2s 3300kV brushless motor, Traxxas BL-2s brushless speed controller and Traxxas 2075 servo.
The package also includes a 2-channel Traxxas TQ 2.4GHz transmitter, a 2S LiPo battery with a capacity of 3000 mAh, a USB-C charger, Allen keys (1.5 mm, 2.0 mm, 2.5 mm), a cross wrench, spring washers, pistons, CZ instructions and EN, DE, FR, SP manuals.
Must be purchased
To operate the model, it is necessary to add 4 AA batteries (pencil batteries) for the transmitter.
Accessories for normal operation
For normal operation of the RC car, you need tire glue, silicone oil for shock absorbers, and a set of Allen screwdrivers.
Tire glue is used to glue the bead of the tire to the rim. It is always necessary to glue the tire firmly around the entire circumference! If the tire is not glued around the entire circumference, it may burst.
Tire glue has a special formula that is able to bond materials such as rubber or nylon, and the bonded joint remains flexible even after hardening. Do not use regular superglue - it is not flexible after hardening, and will gradually cause cracks to form around the rim of the tire.
Screw glue is required for routine maintenance. Screws screwed into metal materials (e.g. screws in a motor or a worm in a pinion) must be secured against loosening with this glue.
Occasionally, it is necessary to add silicone oil to the shock absorbers. During normal operation, only a small amount of silicone oil leaks from the shock absorber piston rods. If the surface of the shock absorber piston rods or the condition of the seals is poor, the oil leakage can be large.
For these cases, so-called repair kits are available. The tuning parts offer includes piston rods with an extremely hard TiN (titanium nitride) coating for all shock absorbers. Piston rods with a TiN coating are easily recognizable by their golden-green color. From our range of silicone oils, we recommend TLR, Traxxas or Medial silicone oils, see recommended accessories.
