RC model of the oval special Traxxas Slash Mudboss in 1:10 scale built on the proven Slash chassis with 2WD drive and speed up to 56 km/h . It is powered by a powerful brushless motor with BL-2S controller . The model is designed to provide competition performance, which is helped by installed improvements, such as the Extreme Heavy Duty high-resistance kit, GTR aluminum shock absorbers and Magnum 272R gearbox. A clipless body mounting system is used for easy battery replacement.
The affordable BL-2S brushless motor included in the model has all the advantages of brushless motors such as higher power, long life and minimal maintenance. The model has a carefully tuned chassis with independent suspension and oil shock absorbers, thanks to which it can easily cope with various surfaces on the track, but also off the track such as asphalt or short grass. For driving in wet environments, the model has waterproof* electronics.
Go for a ride with this unique model, with which you will have a lot of fun. For control, a simple and reliable TQ 2.4 GHz transmitter with precise steering mechanics is included in the package. Of course, a wide range of tuning parts is available, including complete spare parts.
News overview
BL-2S AC drive
The BL-2s AC drive with a 3300rpm/V motor increases speed and acceleration by up to 60% compared to other DC motor drives. Improved efficiency, high-speed ball bearings and an internal cooling fan provide a long motor life with minimal maintenance.
Extreme Heavy Duty Kit Installed
The factory-installed Extreme Heavy Duty kit on the Slash Mudboss replaces key drivetrain and suspension components with upgraded parts built for maximum strength and durability.
Magnum 272R gearbox
The Magnum 272R transmission maximizes racing performance and durability. It features an aluminum engine plate, all-metal gears, and a sealed differential. The low-center-of-gravity design keeps weight as low as possible on the rear axle for better traction and handling.
Stapleless bodywork
The model features a clipless system that holds the body securely in place, yet is quick and easy to remove for battery replacement. The heavily reinforced internal body cage uses robust top and side reinforcements to prevent impact damage and protect the rear tires.
Hoosier tire replica
Hoosier Angle Block replica tires come on graphite gray rims for an authentic look. The tires are made from a special rubber compound that combines durability and traction for consistent performance wheel after wheel.
GTR aluminum shock absorbers
GTR shocks are the pinnacle of racing technology. The color-matched, PTFE-coated aluminum shock body holds over 70% more oil than Ultra Shocks™. Smooth titanium nitride-coated shafts resist wear and increase durability. Spring preload is conveniently adjusted with a nut.
Chassis
The chassis rigidity is ensured by the proven construction of fiber-filled nylon. Thanks to this, the model is light, excellently maneuverable and at the same time resistant to impact. The design of the model with a wide track and long wheelbase is dimensioned in such a way that the center of gravity is lowered as much as possible, thereby achieving perfect maneuverability.
Side reinforcements
Integrated side Nerf bars provide strong lateral support and protection, especially important when riding on an oval in constant lateral skidding.
Adjustable dowels
Durable steel links allow for camber and toe adjustments for specific track conditions. Ball-jointed ends are made of high-strength material to prevent thread loosening.
Precision control
The front wheel steering mechanism is implemented via a Dual-Bell-Crank system, which ensures precise operation of the linkages to the wheels. The steering has an integrated cam servo-saver that absorbs shocks and protects the servo against overload.
Magnum 272R gearbox
2WD is provided by a new Magnum 272R transmission, modified for high performance. The transmission features aluminum housings with tight clearances, metal gears, and a differential for distributing power to the rear wheels. All transmission shafts are housed in high-quality sealed bearings. An integrated, adjustable friction clutch allows for slight slippage during acceleration, absorbing the initial shock of the engine and protecting other components.
Power steering
The Traxxas 2075 high-torque waterproof digital servo with a DC motor and nylon gears has a torque of 9.0 kg.cm and a speed of 0.17 s/60°@ 6.0 V. For water resistance*, the servo housing and output gear are sealed. Two ball bearings provide very smooth operation.
3300kv brushless motor
The Traxxas 3300kv brushless motor provides the ideal affordable drive especially for 1:10 models with all the benefits of high performance, long life and minimal maintenance. The motor is equipped with a Quick Connect connector for easy connection. Other features include:
- Integrated cooling fan
- High-speed ball bearings
- High acceleration
- Efficient operation for longer driving time
Electronic controller BL-2S
Waterproof* electronic BL-2S brushless controller with three driving modes, support for 2S LiPo batteries and easy control with the EZ-Set™ button. The controller is equipped with a training mode that limits full throttle to 50%. Thanks to this, novice drivers or children can gradually get acquainted with the characteristics of the model and prepare for the full power of the car. Thermal protection, protection against underdischarge of LiPo batteries, gold-plated connectors, simple operation, intuitive signaling with a two-color LED and a powerful radiator, which can be supplemented with an optional fan (not included in the package).
BL-2S controller modes
- Sport : Default mode, forward driving, braking and reverse driving are possible.
- Race : A mode suitable for racing. Forward and brake are possible; reverse is not available.
- Training : A mode suitable for children or novice riders. Forward travel is possible with a power limit of 50%, braking and reverse travel again with a power limit of 50%.
Traxxas TQ RC kit
The model is controlled by a Traxxas TQ two-channel proportional steering wheel RC transmitter, operating in the 2.4 GHz band - interference-free operation. The transmitter is powered by only 4 AA batteries.
There is a rotary knob on the transmitter that trims the steering (so that the model drives straight when the steering wheel is in the center position). The battery status in the transmitter is indicated by an LED. The transmitter can be set to reverse on the throttle and steering channels.
TQ receiver
Traxxas TQ 2.4 GHz three-channel receiver ensures safe control without interruptions. Easy one-button pairing. Status indication via LED diode.
Features
- A fully assembled model of an oval special in 1:10 scale
- Factory installed Extreme Heavy Duty kit for high durability
- Clipless body mounting system
- Magnum 272R premium transmission installed
- Redesigned design
- Aluminum engine plate
- Upper shaft made of hardened steel
- Locked differential
- Easy access to the differential
- Revo Spec Torque-Control™ Friction Clutch
- Telescopic shafts with joints
- GTR oil shock absorbers
- Aluminum body
- PTFE coating for smooth operation
- NiT piston rod with exceptional hardness
- Adjusting the spring preload with a nut
- 3300Kv brushless motor with integrated cooling and Quick Connect connector
- BL-2S brushless controller with three driving modes
- Waterproof* 2075 High Torque Servo
- RC kit Traxxas TQ 2.4 GHz
- Licensed Hoosier Tires
- The model is ready for an upgrade to the more powerful VXL drive
*Please refer to the user manual for water resistance specifications. For tips and tricks on wet operation, please visit the blog.
Package contents
The package contains a fully assembled RC car model Traxxas Slash Mudboss 1:10 2BL RTR with installed components: 3300rpm brushless motor, BL-2S brushless controller, Traxxas 2075 servo, 2.4GHz 3-channel receiver TQ. Traxxas 2.4GHz 2-channel transmitter TQ. Accessories: Allen key (1.5, 2, 2.5 mm), connector key, cross key, antenna key, battery spacer, pistons and spring washers. Instructions CZ, manual EN, DE, FR, SP.
