The large RC model of the desert racing car Arrma Mojave 6S BLX 4WD in scale 1:7, generation V3, is even more durable, user-friendly, and faster. The combination of a long wheelbase and a wide track gives the model excellent stability even at high speeds. Thanks to the aluminum chassis, 4x4 drivetrain with three differentials, oil-filled shocks, and an overall robust design, you can enjoy extremely aggressive driving on gravel, dirt, grass, and asphalt. Powered by 4-6S LiPo, it allows speeds of up to 96 km/h. With the upgraded V2 firmware for the controller, the throttle response is smoother. A new body mount system without pins is installed for easy battery swaps.
The model's foundation is the extended aluminum XLWB chassis made of 7075 T6, which offers high strength and rigidity. Power transfer is managed by all-metal drive shafts. The differentials ensure the right amount of slip and engagement, and they also have metal gears. The split reinforcement in the chassis center helps combine rigidity with necessary flexibility. Enhanced side guards, front and rear bumpers, a rear skid plate, and roof rails provide greater protection during impacts. The new body has a more aggressive appearance and a hidden mounting system without traditional body clips. The body can be quickly released using buttons on the sides of the model. The detailed cockpit with a frame and figures of the driver and navigator contributes to the model's scale detail. The dBoots Fortress tires ensure reliable traction on various surfaces.
In addition to the motor and controller, a steering servo with metal gears is also installed. The included SLT 2.4 GHz transmitter reliably controls the model without interference. For less experienced drivers, it allows limiting power to 75% or 50%. The controller supports Smart telemetry – if you're interested in telemetry, you need to purchase a compatible Spektrum universal transmitter with a display separately. If you also use Spektrum Smart batteries in the model, you'll get telemetry data about the battery's charge level.
Aluminum Chassis
The chassis base consists of a plate made of high-strength aluminum 7075-T6. The chassis is precisely machined with drilled holes for screws. Black anodization, along with laser-engraved graphics, gives it a premium look.
Center Reinforcement
Maximum strength and easy servicing are ensured by the split center reinforcement. By simply loosening two screws, you can flap the reinforcements and gain access to the center differential.
Motor Mount
The brushless motor is mounted on a red-anodized motor mount. This sliding mount allows easy adjustment of the motor position.
Servo Saver
The servo saver effectively dampens impacts to the front wheels, protecting the steering servo. The aluminum servo saver is lightweight, helping to reduce the model's overall weight and improve its driving characteristics.
Aluminum Shocks
Excellent driving properties, energy absorption during jumps, and maximum wheel contact with the surface are ensured by oil-filled aluminum shocks. The spring preload can be conveniently adjusted using a nut. The shock's characteristics can be further fine-tuned by changing the oil viscosity. The shock rods are protected by a rubber boot.
Anti-roll Bars
Body roll in corners is compensated by anti-roll bars. Thanks to them, the model is more stable when cornering.
Differential Output Joints
Newly, the differential output joints are made of metal and can easily handle high loads from the 6S brushless drive.
Bumpers and Raised Covers
In case of impacts, the model is equipped with durable bumpers and an absorption zone that helps dissipate impact energy. The raised chassis covers, along with a precisely fitting body, reduce the amount of dirt inside the model.
Pinless Body
The pinless body system with quick-release buttons on both sides ensures a firm attachment while allowing for easy and quick removal of the body.
Body Frame
The body's strength is ensured by an internal frame that runs through the entire length and width of the model. Plastic parts fit precisely to the chassis and, together with the pinless mount, form a solid support. In the event of the model rolling over, the risk of body damage is reduced.
Roof Rails
The roof rails provide added protection for the body and protect it from scratching during rollovers.
Scale Detailing
The model features detailed scale workmanship. In addition to the cab frame and figures of the driver and navigator, the rear part is also detailed with vents and models of fire extinguishers.
Digital Servo SPEKTRUM® S665
- SPEKTRUM® S665 servo with metal gears, 25T spline
- Waterproof*
- Torque 7.4 kg·cm at 7.4 V, speed 0.12 s/60°
Brushless Controller SPEKTRUM™ FIRMA™ 150A V2 SMART 3S-6S
The model is controlled by the modern SPEKTRUM™ FIRMA™ 150A V2 SMART controller with a 32-bit ARM Cortex M4 microcontroller, capable of reading full telemetry and transmitting it to the receiver via an integrated wire in the new IC5 connector. Data is transmitted via the SRXL2 protocol. The controller reads information about the type, temperature, and voltage of the battery cells directly from the Smart battery.Real-time data includes current, temperature, total battery voltage, voltage of individual battery cells, battery temperature, remaining capacity, and motor RPM.
The electronics are completely encased in a special potting compound that prevents moisture* or dirt from entering the electronics. The controller is powered on and adjusted through buttons located under a rubber cover.
The upgraded V2 firmware provides more powerful performance and a confident driving feel.
- The controller features a fast and powerful 32-bit ARM M4 processor.
- The controller is waterproof*
- Overcurrent protection, thermal protection, failsafe
- Automatic LiPo cutoff at low voltage
- Robust plastic housing, aluminum heatsink with fan for high efficiency
- Adjustable high-performance BEC
- Highly durable IC5™ connectors, compatible with EC5™ connectors
Powerful Motor
- Spektrum Firma 2050Kv 4074 motor
- Powered by up to 6 LiPo cells
- Aluminum housing with black anodization and engraved Spektrum logo
- Four-pole design for smooth operation and high torque
- 5 mm diameter shaft supported by ball bearings
- The motor comes factory-equipped with 4 mm gold-plated connectors for reliable connection
- A groove at the end of the motor shaft allows for secure pinion installation.
Spektrum SR315 DSMR Sport
The new generation SR315 DSMR Sport receiver in micro format weighs only 6 g. It allows selection of SmartSafe™ or "Gas" Failsafe, pairing with a button. DSMR technology ensures full range and quick response from the receiver.
- Box design with rounded corners and low weight
- With the pairing button, no pairing connector is needed
- SmartSafe™ Failsafe and "Gas Mode" are available during pairing
- Dual protocol DSMR and SLT
- Compatible with SMART telemetry
Spektrum SLT3 Transmitter
The 3-channel wheel transmitter Spektrum SLT3 operates in the 2.4 GHz band and is compatible with the SLT protocol. The low weight of the Spektrum SLT3 transmitter allows for fatigue-free handling. The wheel is covered with a foam grip for a secure hold. The layout of the controls is practical and intuitive – all controls are positioned for easy access when needed. A secure strap loop is available for attachment.
- 3-channel wheel RC system Spektrum SLT for reliable control
- Proven design for comfortable, fatigue-free handling
- Channel control throw limits
- Throttle and steering trims, throttle and steering reverses
- Motor power limit of 50%, 75%, and 100%
- The third channel can be used for additional devices, such as sound modules.
Spektrum SMART Technology
The Spektrum SMART technology offers more information about the model, telemetry transmission, easier operation, and maintenance of batteries. All SMART components, including batteries, are capable of communicating together and transmitting telemetry.To view complete telemetry, you will need a compatible Spektrum transmitter with a display. Telemetry display depends on the transmitter type for each particular model.
Features
- Large RC model car in scale 1:7 as a desert special
- Power options for 4–6S LiPo with speeds up to 96 km/h
- Chassis made of anodized high-strength aluminum 7075-T6
- The center chassis reinforcement ensures maximum chassis durability
- Independent axle suspension
- 4×4 drive with durable steel drive shafts
- Front, rear, and center differential for optimal power distribution
- Complete metal gears in differentials and transmission
- Adjustable oil shocks with aluminum bodies
- Front and rear shock towers made of black anodized aluminum
- Easily accessible motor mount for quick motor removal
- Effective large servo saver
- Functional sturdy front and rear bumpers
- Ready-to-use, painted body with scale accessories
- Convenient pinless body mounting system
- Protective roof rails and internal body frame
- Waterproof* receiver box
- dBoots® FORTRESS tires
- 3-channel Spektrum SLT3™ 2.4 GHz transmitter
- 3-channel Spektrum SR315 receiver with dual protocol
- Digital Spektrum S665 servo with metal gears
- Spektrum Firma 150A V2 controller with Smart telemetry support
- Spektrum Firma™ 4074 2050 KV brushless motor
Package Contents
The package includes a fully assembled RC model car Arrma Mojave 6S BLX 1:7 4WD with the following installed components: brushless motor Firma 4074 2050Kv, brushless controller Spektrum Smart Firma 150A V2 3-6S Dual IC5, servo Spektrum S665 MG, receiver Spektrum SR315 DSMR. Transmitter Spektrum SLT3 2.4 GHz. Accessories: cross wrench (7, 8, 10, 17 mm), small cross wrench (4, 5, 5.5, 7 mm), hex keys (1.5, 2, 2.5 mm), differential plates, 4x washer 13x16x0.2 mm, IC5 jumper, 4x AA batteries for the transmitter. Instructions in CZ and manuals in EN, DE, FR.
