The large RC model of the desert racing car Arrma Mojave 6S BLX 4WD in 1:7 scale, generation V3, is even more durable, user-friendly and faster. The combination of a long wheelbase and wide track gives the model excellent stability even at high speeds. Thanks to the aluminum chassis, 4x4 drive with three differentials, oil-filled shock absorbers, and an overall robust constructionyou can enjoy extremely aggressive driving on gravel, dirt, grass, and asphalt. Powered by 4-6S LiPo allows you to go at speeds of up to 96 km/h. With the improved V2 firmware for the controller, throttle response is smoother. A new installation of a clipless body mounting system allows for easy battery swaps.
The basis of the model is a extended aluminum XLWB chassis made of 7075 T6 material, which offers high strength and rigidity. Power transfer is provided by all-metal drive shafts. The differentials ensure the correct amount of slip and lock and also have metal gears. The split brace in the center of the chassis helps combine strength with the necessary flexibility. Reinforced side guards, front and rear bumpers, rear chassis protection, and roof rails provide greater safety in crashes. The new body has a more aggressive look and a hidden mounting system without traditional body clips. The body can be quickly released using buttons on the sides of the model. The detailed cockpit with a frame and figures of the driver and navigator contributes to the model's scale appearance. Reliable traction on various surfaces is guaranteed by dBoots Fortress tires.
In addition to the motor and controller, there is also a steering servo with metal gears installed. The supplied SLT 2.4 GHz transmitter reliably and without interference controls the model. For less experienced drivers, it allows limiting power to 75% or 50%. The controller supports Smart telemetry – if you are interested in telemetry, you need to purchase a separate Spektrum universal transmitter with a display instead of the included transmitter. If you also use Spektrum Smart batteries in the model, you will get telemetry from the batteries (charge level).
Aluminum Chassis
The chassis base consists of a chassis plate made from high-strength aluminum 7075-T6. The chassis is precisely machined with drilled holes for screws. The black anodization combined with laser-engraved graphics gives it a premium look.
Center Brace
Maximum strength and easy servicing are ensured by the split center brace. By simply loosening two screws, you can lift the brace and gain access to the central differential.
Motor Mount
The brushless motor is installed on a red anodized motor mount. This sliding mount allows for easy adjustment of motor position.
Servo Saver
The servo saver effectively absorbs shocks from the model on the front wheels, thus protecting the steering servo. The aluminum servo saver is also lightweight, helping to reduce the model's weight and improve its driving characteristics.
Aluminum Shock Absorbers
Excellent driving characteristics, energy absorption during jumps, and maximum wheel contact with the surface are ensured by oil-filled aluminum shock absorbers. The spring preload can be conveniently adjusted using a nut. The shock properties can be further fine-tuned by changing the oil's viscosity. The shafts are protected by rubber boots.
Anti-Roll Bars
Body roll in corners is compensated by anti-roll bars. Thanks to them, the model is more stable while cornering.
Differential Output Cups
The differential output cups are now made of metal and can handle high loads from the 6S brushless drive without issues.
Bumpers and Raised Covers
In the event of impacts, the model is fitted with durable bumpers and an absorption zone that helps to absorb impact energy. The raised chassis covers together with the precisely fitting body reduce the amount of dirt inside the model.
Clipless Body
The clipless body system with quick-release buttons on both sides ensures a secure attachment while allowing the body to be easily and quickly removed.
Body Frame
The strength of the body is ensured by the internal frame that runs the full length and width of the model. Plastic parts fit precisely onto the chassis, and together with the clipless mount, they provide a solid support. In the event of the model overturning, it reduces the risk of body damage.
Roof Rails
The roof rails provide increased protection for the body and protect it from scratches during model rollovers.
Scale Detailing
The model features detailed scale detailing. In addition to the frame construction of the cabin andDriver and navigator figures, the rear part is also finely crafted with vents and replicas of fire extinguishers.
Digital Servo SPEKTRUM® S665
- Servo SPEKTRUM® S665 with metal gears, 25T spline
- Water-resistant*
- Torque 7.4 kg.cm at 7.4 V, speed 0.12 s/60°
Brushless Controller SPEKTRUM™ FIRMA™ 150A V2 SMART 3S-6S
Control of the model is provided by the modern SPEKTRUM™ FIRMA™ 150A V2 SMART controller with a 32-bit ARM Cortex M4 microcontroller, capable of capturing complete telemetry and transmitting it to the receiver via an integrated wire in the new IC5 connector. Data is transmitted via the SRXL2 protocol. Information regarding type, temperature, and voltage of the battery cells is read directly from the Smart battery.In real-time, current, temperature, total battery voltage, voltage of individual battery cells, battery temperature, remaining capacity, and motor RPM are available.
The electronics are completely coated in a special potting compound that prevents moisture* or dirt from entering the electronics. The controller is turned on and set via buttons that are under a rubber cover.
The upgraded V2 firmware ensures more robust performance and a confident driving feel.
- The controller contains a fast and powerful 32-bit ARM M4 processor.
- The controller is water-resistant*
- Overcurrent protection, thermal protection, failsafe
- Automatic LiPo disconnect at low voltage
- Robust plastic housing, aluminum heatsink with fan for high efficiency
- Adjustable high-performance BEC
- Highly durable IC5™ connectors, compatible with EC5™ connectors
Powerful Motor
- Spektrum Firma 2050Kv 4074 Motor
- Powered by up to 6 LiPo cells
- Aluminum housing with black anodization and engraved Spektrum logo
- Four-pole design for smooth operation and high torque
- 5 mm shaft is mounted in ball bearings
- The motor comes factory-equipped with 4 mm gold-plated connectors for reliable connection
- A slot at the end of the motor shaft allows for secure pinion mounting.
Spektrum SR315 DSMR Sport
The SR315 DSMR Sport receiver of the new generation in a micro size weighs only 6 g. The option of choosing SmartSafe™ or "Gas" Failsafe, pairing with a button. DSMR technology ensures full range and quick response of the receiver.
- Box design with rounded corners and low weight
- Thanks to the pairing button, you do not need a pairing connector
- SmartSafe™ Failsafe and "Gas Mode" available during pairing
- Dual protocol DSMR and SLT
- Compatible with SMART telemetry
Spektrum SLT3 Transmitter
The 3-channel wheel transmitter Spektrum SLT3 operating in the 2.4 GHz band is compatible with the SLT protocol. The low weight of the Spektrum SLT3 transmitter allows for fatigue-free holding. The wheel is covered with a foam grip for a secure hold. The layout of the controls is practical and intuitive – all controls are positioned for quick access when needed. A secure strap attachment is available for securing it.
- 3-channel wheeled RC set Spektrum SLT for reliable control
- Proven design for comfortable hold without fatigue
- Options for limiting maximum steering deflections
- Throttle trim and steering reverse
- Motor power limiter 50%, 75%, and 100%
- The third channel can be used for additional devices, e.g. sound modules.
Spektrum SMART Technology
The Spektrum SMART technology offers more information about the model, telemetry transmission, easier operation, and battery care. All SMART components, including batteries, can communicate with each other and transmit telemetry. To view the complete telemetry, a compatible Spektrum transmitter with a display is required. The telemetry display depends on the type of transmitter for the specific model.
Features
- Large RC model car in 1:7 scale as a desert special
- Can be powered by 4-6S LiPo with speeds up to 96 km/h
- Chassis made from anodized high-strength aluminum 7075-T6
- Center brace ensures maximum resistance of the chassis
- Independent axle suspension
- 4×4 drive with durable steel drive shafts
- Front, rear, and center differential for optimal power distribution
- Complete metal gears in differentials and gearbox
- Adjustable oil-filled shock absorbers with aluminum bodies
- Front and rear shock towers made from black anodized aluminum
- Easily accessible motor mount for quick motor removal
- Effective large servo-saver
- Functional robust front and rear bumpers
- Ready-to-use, painted body with scale accessories
- Convenient clipless body mounting system
- Protective roof rails and internal body frame
- Water-resistant* receiver case
- dBoots® FORTRESS tires
- 3-channel Spektrum SLT3™ 2.4 GHz transmitter
- 3-channel Spektrum SR315 receiver with dual protocol
- Digital servo Spektrum S665 with metal gears
- Spektrum Firma 150A V2 controller with Smart telemetry support
- Spektrum Firma™ 4074 2050 KV brushless motor
Contents
The package includes the assembled RC model car Arrma Mojave 6S BLX 1:7 4WD with installed components: brushless motor Firma 4074 2050Kv, brushless controller Spektrum Smart Firma 150A V2 3-6S Dual IC5, servo Spektrum S665 MG, receiver Spektrum SR315 DSMR. Transmitter Spektrum SLT3 2.4 GHz. Accessories: cross wrench (7, 8, 10, 17 mm), small cross wrench (4, 5, 5.5, 7 mm), hex keys (1.5, 2, 2.5 mm), differential plates, 4x washer 13x16x0.2 mm, IC5 jumper, 4x AA batteries for the transmitter. Manual in Czech and manuals in English, German, French.
