5014 First Gear HS-965/985MG/5965/5985/5955/5995, 6.7 3pcs
unavailable
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 114,34 € |
| Temporarily unavailable | |
|
|
Send a question
on availability |
|
Send a question
on availability |
|
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
#Chcete dostat upozornění ve chvíli, kdy produkt bude k dispozici? Stačí vyplnit formulář a náš hlídací pes Vám dá vědět.
A very powerful and fast standard-size digital servo with next-generation titanium gears and ultra-fast response electronics for demanding applications. Programmable. Power supply: 4.8–7.4 V. Torque: 18 kg/cm, speed: 0.19 s/60° at 4.8 V; torque: 29 kg/cm, speed: 0.12s/60° at 7.4 V.
Hitec “Wide Voltage” technology supports all types of receiver batteries with a nominal voltage of 4.8–7.4 V. This means you can power the servos directly from, for example, a four- to six-cell NiMH or NiCd battery, or a two-cell LiFe, LiPo or Li-ion battery – of course, bear in mind that the servo’s torque and speed depend on the supply voltage.
Output shaft with a 25-tooth spline
The output shafts of D-series servos feature a standard 25-tooth spline (which, among other things, allows more precise positioning of the servo arm perpendicular to the servo’s longitudinal axis), and use new arms with a matching spline (not compatible with older Hitec servos).
Soft start
Soft start protects the servo and rudder control mechanism when the onboard electronics are switched on – after power-up, the servo slowly moves to the neutral position, with no sudden jerking.
Programmable functions
Using the new DPC-11 programmer/USB interface, you can adjust a range of parameters on D-series servos to perfectly tailor the servo to your application. D-series servos maintain high resolution at all times; using the “End Point Adjustment (EPA)” function, you can set the servo travel range to up to 180° (with a control signal pulse width of 0.9–2.1 ms). Programmable values include:
The servos are resistant to splashes and moisture (they are not designed for permanent immersion in water). This makes them suitable for use in harsher operating conditions in RC cars, boats and other models where the servos are exposed to the elements.
D955TW
A very powerful servo with titanium gears and an output shaft supported by two ball bearings, designed for use in large RC models. Particularly suitable for large RC helicopters, giant-scale aircraft models, 1:8/1:5 RC racing cars and similar applications with very high torque requirements.
Will eventually replace the HS-7945TH and HS-8370TH servos.
| Size | Standard |
| Type | Digital |
| Torque @ 4.8V [kg/cm] | 18 |
| Torque @ 6.0V [kg/cm] | 24 |
| Torque @ 7.4V [kg/cm] | 29 |
| Speed @ 4.8V [s/60°] | 0.19 |
| Speed @ 6.0V [s/60°] | 0.15 |
| Speed @ 7.4V [s/60°] | 0.12 |
| Gear Material | Titanium |
| Ball Bearing | 2xBB |
| High Voltage | Yes |
| Operating Voltage [V] | 4.8 - 7.4 |
| Length [mm] | 40 |
| Width [mm] | 20 |
| Height [mm] | 37 |
| Weight [g] | 66 |
| Suitable for | Aircrafts, helicopters, cars, boats |
| Output Spline | 25-tooth |
| Water Resistant | Yes |
17 items
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.