Product inquiry
Extra NG 1.7m ARF (yellow)
Goods code: OMPP011YB
Extra NG 1.7m ARF (yellow)
| Price in e-shop with VAT: | 647,13 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a question-
Product Description
-
Technical Data:
Product Description
OMP OMPP011YB - Extra NG 1.7m ARF (yellow)
ARF kit of a 3D aerobatic special with a 1700 mm wingspan, designed for a brushless electric motor with an output of at least 2000–2600 W, powered by a 6S LiPo battery. A very lightweight construction made from parts reinforced with Kevlar and carbon, with many carbon components.
This sport-scale aerobatic aircraft is designed for experienced pilots who want to fly both classic and extreme 3D aerobatics.
The model’s fuselage is of traditional construction, made from laser-cut plywood and balsa parts reinforced with Kevlar and carbon. The removable fibreglass motor cowling and removable upper fuselage section with cockpit provide excellent access to the power system and RC equipment. The motor is mounted at the rear on a plywood box mount.
The two-piece wing with a symmetrical airfoil (the halves slide onto a carbon tube joiner from the sides and are secured with screws) is also of traditional construction, with a rigid all-balsa sheeted surface. The large ailerons are operated by 2 independent servos. The supplied SFG wingletts can be fitted to the wingtips.
The tail surfaces are of lightweight all-balsa construction. The horizontal stabilizer is one piece, with the stabilizer glued into the fuselage. The elevator and rudder are operated by servos mounted in the tail section of the fuselage via short, direct pushrods.
The entire model is covered with Ultracote iron-on film (the trade name used in the USA for the well-known Oracover films).
The landing gear is of the taildragger type, with carbon main legs, wheels with fibreglass covers, and a wire tailwheel assembly with a carbon bracket linked to the rudder.
For propulsion, you will need a brushless electric motor with an output of at least 2000–2600 W (e.g. Kavan PRO 7025-510, Sunnysky X6215-420, etc.) with a speed controller rated at least 120A. Power is supplied by a 6S LiPo battery with a capacity of 4000–4500 mAh and a discharge rating of at least 40C.
A minimum four-channel computerised RC system that allows you to program dual rates and exponential rates to the appropriate values will be suitable for controlling the model.
Fast, powerful servos in standard size are suitable – e.g. Kavan GO-1053MG for recreational flying, Kavan GO-1070MG or MKS HV777A+, or HBL380, etc. for 3D aerobatics.
Package contents
The package contains the fuselage, wing and tail surfaces covered with iron-on film, a painted fibreglass motor cowling, a complete set of accessories, carbon landing gear, tailwheel assembly, wheels and instructions.
Warning: Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (conventional model aircraft, multicopters, drones) weighing more than 250 g or carrying a camera or another sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). Further information can be found here: Registration of operators and pilots.
Technical Data:
| Wingspan [mm] | 1700 |
| Length [mm] | 1715 |
| Weight [g] | 3800 |
| Wing area [dm2] | 57,6 |
| Building difficulty | S1, S2 |
| Flying difficulty | P3, P4 |
| Controlled functions | S, V, K (2), M |