Product inquiry
Extra NG 1.7m ARF (Red)
Goods code: OMPP011RB
Extra NG 1.7m ARF (Red)
| Price in e-shop with VAT: | 647,13 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a question-
Product Description
-
Technical Data:
Product Description
OMP OMPP011RB - Extra NG 1.7m ARF (Red)
ARF kit of a 3D aerobatic aircraft with a 1700 mm wingspan, designed to be powered by a brushless electric motor rated at least 2000–2600 W and supplied by a 6S LiPo battery. Very lightweight construction made from parts reinforced with Kevlar and carbon, with many carbon components.
This sport-scale aerobatic aircraft is designed for experienced pilots who want to fly both classic and extreme 3D aerobatics.
The model’s fuselage features a conventional construction from laser-cut plywood and balsa parts reinforced with Kevlar and carbon. The removable fiberglass motor cowl and removable upper fuselage section with cockpit provide excellent access to the power system and RC equipment. The motor is mounted at the rear on a plywood box mount.
The two-piece wing with a symmetrical airfoil (the halves slide in from the sides onto a carbon tube joiner and are secured with screws) also features conventional construction, with a full balsa sheet covering. The large ailerons are controlled by 2 independent servos. The wingtips can be fitted with the included SFG wingtips.
The tail surfaces feature lightweight all-balsa construction. The horizontal stabilizer is one piece, with the stabilizer glued into the fuselage. The elevator and rudder are controlled by servos mounted in the rear of the fuselage, using short, direct pushrods.
The entire model is covered with iron-on Ultracote film (the trade name used in the USA for the well-known Oracover films).
The landing gear is of the taildragger type, with carbon main legs, wheels with fiberglass fairings, and a wire tailwheel with a carbon bracket linked to the rudder.
For power, you will need a brushless electric motor rated at least 2000–2600 W (e.g. Kavan PRO 7025-510, Sunnysky X6215-420, etc.) with a speed controller rated at least 120A. Power is supplied by a 6S LiPo battery with a capacity of 4000–4500 mAh and a discharge rating of at least 40C.
To control the model, a computer radio system with at least four channels is suitable, allowing you to program dual rates and exponential rates to the appropriate values.
Fast, powerful standard-size servos are suitable—for example, Kavan GO-1053MG for recreational flying, or Kavan GO-1070MG, MKS HV777A+, HBL380, etc. for 3D aerobatics.
Package contents
The package contains the fuselage, wing and tail surfaces covered with iron-on film, a painted fiberglass motor cowl, a complete set of accessories, carbon landing gear, tailwheel, wheels and instructions.
Warning: Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (conventional model aircraft, multicopters, drones) weighing more than 250 g or carrying a camera or another sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). Further information can be found here: Registration of operators and pilots.
Technical Data:
| Wingspan [mm] | 1700 |
| Length [mm] | 1715 |
| Weight [g] | 3800 |
| Wing area [dm2] | 57,6 |
| Build difficulty | S1, S2 |
| Pilot skill level | P3, P4 |
| Controlled functions | S, V, K (2), M |