Product inquiry
OMP Challenger 1,25m ARF (red)
Goods code: OMPP009R
OMP Challenger 1,25m ARF (red)
| Price in e-shop with VAT: | 196,31 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a question-
Product Description
-
Technical Data:
Product Description
OMP OMPP009R - OMP Challenger 1,25m ARF (red)
ARF kit of a sport aerobatic high-wing aircraft with a 1250 mm wingspan, designed for a 500–600 W brushless electric motor powered by a 3S LiPo battery. Classic construction from plywood and balsa parts, covered with iron-on film. Ailerons, rudder and elevator are controlled.
The Challenger sport aerobatic high-wing aircraft is ideal for relaxed flying by experienced RC pilots, but is equally suitable for recreational flyers for whom it can be their first fully aerobatic aircraft.
The fuselage has a classic construction made of lightweight plywood and balsa, covered with Oracover iron-on film. It is ready for installation of a brushless electric motor in a rear-mounted configuration, such as the Kavan C3542-1000, Kavan PRO 3542-1150, Model Motors AXI 2820/12, etc. We recommend a 40–60A speed controller with a high-performance SBEC power stabilizer.
Removable covers on the top and bottom of the nose provide access to the compartments for the onboard electronics and drive battery. The micro servos for controlling the rudder and elevator are installed in the tail section of the fuselage.
The two-piece wing with a semi-symmetrical airfoil also has a classic all-balsa construction and is covered with iron-on film. The wing halves slide onto the carbon tube joiner from the side and are secured with screws. Full-span ailerons are controlled by two micro servos housed in the wing, using short wire pushrods with ball links.
The tail surfaces are of lightweight all-balsa construction, covered with iron-on film. The main landing gear is made of duralumin and fitted with lightweight, large-diameter foam wheels; the wire tail skid is linked to the rudder.
To control the model, you will need at least a 4-channel RC system, but to make full use of the model’s potential, you should use at least a 6-channel computer RC system that allows independent control and mixing of the ailerons.
Use high-quality 17 g micro servos with metal gears to control the control surfaces, such as the Kavan GO-17MG or Hitec HS-85MG. For 3D aerobatics, use powerful, fast digital micro servos such as the Kavan GO-1020MG.
You can power the model with a 500–600 W brushless electric motor, such as the Kavan PRO 3542-1150 with a 12×6–6.5“ propeller. In this case, we recommend using a 50–60A speed controller and a 3S LiPo battery with a capacity of 2200–3000 mAh and a discharge rating of at least 30–40C.
Package contents
The package contains an assembled fuselage, wing and tail surfaces covered with iron-on film, a carbon wing joiner, duralumin main landing gear and tail skid with lightweight wheels, a propeller spinner, small accessories, a sheet of self-adhesive decals and instructions.
Notice: Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (conventional model aircraft, multirotors, drones) weighing more than 250 g or carrying a camera or other sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). Further information can be found here: Registration of operators and pilots.