Combo set Kavan PRO 3542-1150 & Kavan PRO-80SB
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 265,98 € |
| Temporarily unavailable | |
|
|
Send a question
on availability |
|
Send a question
on availability |
|
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
#Chcete dostat upozornění ve chvíli, kdy produkt bude k dispozici? Stačí vyplnit formulář a náš hlídací pes Vám dá vědět.
ARF kit of a sport high-wing aircraft with a 1250 mm wingspan, 3D capabilities and an extremely short take-off (thanks to its large flaps), designed for a 500–600 W brushless electric motor powered by a 3S LiPo battery. Lightweight construction made from plywood and balsa parts, covered with iron-on film. Ailerons, flaps, rudder and elevator are controlled.
The Bighorn Pro aerobatic high-wing aircraft proves that a well-powered high-wing aircraft of classic all-balsa construction, with large control surfaces and flaps, can be just as fun to fly as similar “foam” models. If you like what various “fun” Piper models do in the air, but foam models have never been your thing, the Bighorn Pro is definitely a good choice.
The fuselage has a classic “box” construction made of lightweight plywood and balsa, covered with Oracover iron-on film. The model is designed for installation of a rear-mounted brushless electric motor. You can use motors such as the Kavan C3542-1000, Kavan PRO 3542-1150, Model Motors AXI 2820/12, etc., together with a 40–60A speed controller equipped with a powerful SBEC power stabilizer.
Access to the compartments for the onboard electronics and propulsion battery is provided by the removable front section of the cockpit and a cover on the cockpit roof. The micro servos for controlling the rudder and elevator are installed in the tail section of the fuselage.
The two-piece wing with a semi-symmetrical airfoil also has a classic all-balsa construction, covered with iron-on film. Both wing halves slide onto the carbon tube joiner from the side and are secured with screws. The large ailerons and flaps are controlled by micro servos housed in the wing, using short wire pushrods with ball links.
The tail surfaces are of lightweight all-balsa construction and are also covered with iron-on film.
The main landing gear is made of duralumin and fitted with large-diameter lightweight foam wheels; the wire tail skid is connected to the rudder.
To control the model, you will need at least a six-channel RC system. To make full use of the model’s potential, however, you should use at least a seven-channel computer RC system that allows independent control and mixing of the ailerons and flaps. Use high-quality 17 g micro servos with metal gears for the control surfaces, such as the Kavan GO-17MG or Hitec HS-85MG. For 3D aerobatics, use powerful, fast digital micro servos (e.g. Kavan GO-1020MG).
For the power system, you can use a 500–600 W brushless electric motor, such as the Kavan PRO 3542-1150 with a 12×6–6.5“ propeller and a 50–60A speed controller. We recommend a 3S LiPo battery with a capacity of 2200–3000 mAh and a discharge rating of at least 30–40C.
Package contents
The package contains the fuselage, wing and tail surfaces covered with iron-on film, a painted fibreglass motor cowl, a carbon wing joiner, duralumin main landing gear and tail skid with lightweight wheels, a propeller spinner, small accessories, a sheet of self-adhesive decals and instructions.
Notice: In accordance with Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (traditional model aircraft, multicopters, drones) weighing more than 250 g or carrying a camera or other sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). Further information can be found here: Registration of operators and pilots.
| Wingspan [mm] | 1250 |
| Length [mm] | 1040 |
| Weight [g] | 1365–1410 |
| Wing area [dm2] | 27,4 |
| Build difficulty | S1 |
| Pilot skill level | P2, P3, P4 |
| Controlled functions | S, V, K (2), M, F (2) |
8 items
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.