Kavan GO-1035MG BB Brushless HiVolt DIGITAL
unavailable
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 450,41 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a questionARF kit of a 3D aerobatic special with a wingspan of 1524 mm, designed for a 1200–1600W brushless electric motor powered by a 6S LiPo battery. Very lightweight construction, made from parts reinforced with Kevlar and carbon, with numerous carbon components.
The model’s fuselage is of conventional construction, made from laser-cut plywood and balsa parts reinforced with Kevlar and carbon. The removable fiberglass motor cowl and removable upper fuselage section with cockpit provide excellent access to the power system and RC equipment. The motor is mounted at the rear on a plywood box mount.
The two-piece wing, featuring a symmetrical airfoil (the halves slide onto a carbon tube joiner from the sides and are secured with screws), is also of conventional construction, with a rigid all-balsa skin. The large ailerons are controlled by 2 independent servos. The supplied SFG wingletts can be fitted to the wingtips.
The tail surfaces are of lightweight all-balsa construction; the horizontal stabilizer is a single piece, with the stabilizer glued into the fuselage. The elevator and rudder are controlled by servos mounted in the rear fuselage, using short, direct pushrods.
The entire model is covered with iron-on Ultracote film (the trade name used in the USA for the well-known Oracover films).
The landing gear is of the taildragger type, with carbon main legs, lightweight wheels with fiberglass fairings, and a wire tail skid with a carbon bracket linked to the rudder.
For power, you will need a 1200–1600 W brushless electric motor (e.g. Kavan PRO 5050-515) with an 80–100A speed controller. We recommend a 6S LiPo power battery with a capacity of 3300–4000 mAh and a discharge rating of at least 40C.
A computerised RC system with at least four channels, allowing precise programming of appropriately sized exponential control rates, is suitable for controlling the model.
Fast, powerful mini servos are suitable – e.g. Kavan GO-1035MG, etc.
Package contents
The package contains the fuselage, wing and tail surfaces covered with iron-on film, a painted fiberglass motor cowl, a complete set of accessories, carbon landing gear, tail skid, wheels and instructions.
Notice: Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (conventional model aircraft, multicopters, drones) weighing more than 250 g or carrying a camera or other sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). Further information can be found here: Registration of operators and pilots.
| Wingspan [mm] | 1524 |
| Length [mm] | 1500 |
| Wing area [dm2] | 42,3 |
| Weight [g] | 2750–2850 |
| Controlled functions | S, V, K (2), M |
| Build difficulty | S1 |
| Flying difficulty | P3, P4 |
Recommended power system and RC equipment:
| Motor | Kavan PRO 5050-515 |
| Speed controller | Kavan PRO R-100SB |
| Battery | Kavan 22,2 V 3300 mAh 40/80C |
| Propeller | Kavan 16×8“ |
| Servos | 4× HS-5245MG |
| HV servos | 4× Kavan GO-1035MG |
| RC system | Min. 4 channels | r>
4 items
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.