KAVAN Bristell B23 1600mm - propeller
unavailable
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 352,05 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a questionA practically ready-to-fly semi-scale model of a Czech training and touring aircraft with a 1600 mm wingspan, made from virtually indestructible, carbon-reinforced extruded foam polyolefin (EPO). Equipped with a C3548-800 brushless motor, a 10×6" three-blade propeller, an R-50SB ESC and 7 micro servos. Ailerons, flaps, rudder, elevator, steerable nose gear and motor speed are controlled. The model is equipped with functional LED lights.
In 2009, renowned aircraft designer Milan Bříštěla and his son Martin founded BRM AERO s.r.o. Their very first aircraft, the Bristell Classic, a two-seat low-wing ultralight with tricycle nose gear, was an enormous success (more than 600 are flying worldwide) and enabled the development and production of further types. The latest addition is the Bristell B23, a two-seat training low-wing aircraft with an all-metal structure and composite main landing gear, certified to EASA CS-23/U.S. 14 CFR (FAR) Part 23 requirements. The full-size B23, equipped with a modern “glass” cockpit and the latest avionics, is the ideal aircraft for flight schools and basic pilot training, as well as for touring and recreational flying. And now you can enjoy flying a semi-scale model of this beautiful aircraft, with a 1600 mm wingspan and powered by a high-performance brushless motor!
The model's fuselage is made of highly durable EPO foam (extruded polyolefin) with extensive internal carbon reinforcements. A C3548-800 brushless electric motor with a 10×6“ three-blade propeller and a Kavan R-50SB ESC is installed in the nose. The canopy is removable and secured by a pin at the front and two mechanical latches at the rear. There is plenty of room in the cabin for the flight battery and receiver.
The model's wing is a two-piece design, reinforced with carbon spars and joined by a carbon tube connector. The ailerons and flaps are controlled independently by two servos with short, straight wire pushrods. Functional LED navigation and landing lights are also included.
The tail surfaces are also made of EPO foam. The rudder and elevator servos are housed in the fin and horizontal stabilizer. The control surfaces are operated by short, straight wire pushrods.
The fixed landing gear has a tricycle configuration, with a wire-steered nose gear and an aluminum main landing gear. All wheels are fitted with elegant aerodynamic covers. The model is powered by a C3548-800-class brushless motor with a Kavan R-50SB 50A ESC.
Required to complete
You will need a 4S LiPo battery with a capacity of 2600–3300 mAh and a discharge rating of at least 30C, fitted with an XT60 power connector. Choose a battery type that gives you the correct center of gravity with as little additional ballast as possible.
You can operate the model with a basic 6-channel computer RC system without special functions. In the basic configuration, the ailerons, flaps, rudder and nose gear servo are each connected to a single channel via a connection board installed in the cabin. The board also supplies power to the LED lights.
Ideally, use a computer RC system with at least 7 channels, which allows the ailerons and flaps to be controlled independently by two servos—a feature available even on the affordable Radiolink AT9S. In this case, connect the aileron and flap servos using four separate 15–30 cm extension leads. The manual also includes a detailed table of tested initial control-surface throws to help you prepare the B23 for flight with ease.
Package contents
The package contains a finished fuselage, wing and tail surfaces made of EPO foam, with the motor, propeller, ESC, 7 servos and LED lights installed. The package also includes clear instructions in Czech.
Notice: Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (conventional model aircraft, multicopters, drones) weighing more than 250 g or carrying a camera or another sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). More information is available here: Registration of drone operators and pilots.
| Wingspan [mm] | 1600 |
| Length [mm] | 1151 |
| Weight [g] | 2100 |
| Wing area [dm2] | 36,8 |
| Controlled functions | S, V, K (2), M, F (2), PN |
| Building difficulty | S0, S1 |
| Piloting difficulty | P2 |
| Motor | *) C3548-800 |
| ESC | *) Kavan R-50SB |
| Propeller | *) Three-blade 10×6“ |
| Flight battery | Kavan 14,8V 2600mAh 40/80C, Kavan 14,8V 3300mAh 40/80C |
| Servos | *) 7× micro servo |
| RC system | At least 7-channel, computer |
| *) Included in the ARF set | |
14 items
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.