Six-channel computerized steering wheel 2.4GHz RC kit Futaba F-4G and T-FHSS with telemetry/S-FHSS/Mini-Z for competitive and advanced recreational car and boat models. 3.2" color LCD display, 6 digital trims, 3 switches, 1 knob/switch, memory for 40 models + SD card. Advanced program settings of functions and mixes for cars, crawlers, tanks or speedboats. With R404SBS receiver (super fast F-4G with telemetry).
The transmitter can also be switched to T-FHSS with telemetry or S-FHSS without telemetry transmission modes, allowing you to use the full range of T-FHSS and S-FHSS receivers for RC cars and boats. With the R404SBS F-4G receiver, you have 4 PWM channels for classic servos (with individually adjustable mode for Futaba UR/SR servos , digital or analog servos), channels 5/6 on the S.BUS2 serial output for S.BUS2 servos and the ability to transmit telemetry from sensors connected to the S.BUS2 socket. It also allows you to connect the FS-RM005 transmitter module for controlling Kyosho Mini-Z Evo models.
The T6PV transmitter in a classic steering wheel design with a handle that fits perfectly in the hand is equipped with a steering wheel control, a throttle trigger, three push-button switches, one rotary control combined with a push-button switch and six digital trims (4 around the steering wheel, 2 on the handle).
The steering wheel and throttle have a wide range of mechanical adjustments to perfectly suit your hands and driving style. Programming is done using a joystick, four buttons and a 3.2" backlit color LCD display.
The T6PV has a memory for 40 models, infinitely expandable using a microSD card, and a wide range of advanced program functions for common and special car models (e.g. independent steering and drive (with 2 controllers) of the front and rear wheels for crawlers, dual-circuit brakes for large 1:5 models, gyro for drifting, ABS, traction control, mix for tanks, etc.).
To operate the transmitter, you will need 4 AA alkaline batteries or NiMH batteries, or a 5-cell NiMH, 2S LiPo or LiFe battery pack.
Ultra Response Mode
Ultra Response (UR) mode achieves a further improvement in response of approximately 30% compared to conventional SR mode. Operation in UR mode is possible in combination with compatible servos.
F-4G transmission system
Futaba F-4G 2.4GHz is a new transmission system with super fast response allowing the transmission of telemetry and up to 6 channels. On channels 1-4, each channel can (depending on the settings on the transmitter) operate in a different mode, transmitting a narrowband signal for Futaba UR/SR servos for classic digital servos or for analog servos. Channels 5 and 6 are transmitted as a serial signal for S.BUS2 servos.
T-FHSS transmission system
This transmission system allows the transmission of telemetry data from sensors connected to the S.BUS2 socket on the receiver. ATTENTION: The transmitter is not compatible with T-FHSS Air receivers for flying models.
S-FHSS transmission system
The S-FHSS transmission system allows you to control compatible Futaba receivers, including aircraft receivers or, for example, the FUT5102690 USB simulator module.
Transmission system for Kyosho Mini-Z EVO
This transmission system allows you to pair the transmitter with the 82042 and 82044 receiver for the popular Kyosho Mini-Z EVO cars.
Transmission system for Kyosho Mini-Z EVO2
This transmission system allows you to pair the transmitter with the 82044 and 82046 receiver with telemetry and the ability to adjust steering and throttle parameters for the Kyosho MR-04 chassis.
Transmission system for Kyosho Mini-Z FHSS
After connecting the Kyosho Mini-Z FS-RM005 RF module to the T6PV, this transmission system allows you to control Kyosho Mini-Z RWD, AWD, 4x4 chassis sets and adjust the parameters of the steering, throttle, gyroscope, etc.
Function:
- transmission system F-4G with telemetry, T-FHSS-2.4GH with telemetry, S-FHSS (without telemetry), Mini-Z EVO (without telemetry), Mini-Z EVO2 with telemetry and MiniZ FHSS (requires FS-RM005 transmitter module) directly for Mini-Z EVO;
- 6 proportional channels in the F-4G transmission system / 6 proportional channels in the S-FHSS Normal transmission mode / 4 proportional channels in the T-FHSS, S-FHSS (High Speed), Mini-Z EVO, Mini-Z EVO2 and Mini-Z FHSS transmission systems;
- steering wheel control with adjustable neutralization and eccentric displacement using an adapter (supplied with the kit);
- 2 interchangeable steering wheels of different diameters, interchangeable adapter for adjusting the steering wheel's range of motion (32° or 34°);
- throttle trigger with adjustable neutralization range of motion for brake/reverse function;
- 3 push-button switches (assignable);
- 1 rotary knob/push button switch (assignable);
- 6 digital trims (assignable);
- microSD card slot;
- communication port for wired programming of servos (Futaba) and controllers (Futaba/Acuvance).
Program functions:
- program menu in English, Japanese, German, Dutch, French, Spanish, Czech and Italian;
- memory for 40 models with the ability to copy, reset and set a 15-character model name;
- memory expansion with microSD card;
- choice of transmission system: F-4G, T-FHSS, S-FHSS, Mini-Z EVO, Mini-Z EVO2, Mini-Z FHSS (must connect FS-RM005 module);
- setting the size of deflections for all channels;
- servo deflection limit (limitation of the max. range of deflections when using mixers);
- reversing the sense of deflections for all channels;
- subtrims for all channels;
- steering and throttle response curve settings: Exponential deflection curve, or a polyline curve with straight sections for left/right steering and forward/backward throttle;
- adjustable steering and throttle response rate for easy “dull” of overly sharp response by adjusting a single parameter;
- steering and throttle servo speed;
- double steering deflections;
- jump acceleration;
- servo monitor (for quick control of servo movement, especially in mixed channels);
- ABS;
- safe idling;
- throttle/brake control modes;
- traction control;
- start (protects against wheel spin on an uneven surface during start);
- engine shutdown;
- drag racing (use of the so-called trans-brake for a quick start from a standstill);
- assigning controls for individual channels;
- fail-safe emergency deflections for all channels;
- S.BUS servo settings;
- remote control of program functions of Futaba/Acuvance speed controllers (requires S.BUS adapter SBM-1/OP-15127);
- wireless adjustment of the advanced gyro for drift cars GYD550;
- assigning trim functions;
- assigning switch functions;
- mix for steering with 2 servos;
- front/rear brake mix with 2 servos;
- gyro control mixer;
- 4WS mix for independent front and rear axle control for crawlers;
- mixer for the drive system with 2 speed controllers;
- CPS mix for controlling LED lights;
- mix for tanks – for controlling the movement of tracked vehicles;
- 5 freely programmable mixes with selectable waveforms – linear with offset, exponential, or polyline curve with linear sections;
- a mix for controlling the winch together with the gas;
- 4 timepieces (stopwatch, timer, lap time with 80 lap memory);
- telemetry display;
- telemetry sensor settings;
- recording telemetry data to a microSD card.
Compatible receivers:
- Futaba R204GF-E S-FHSS/FHSS-2.4GHz (4-channel, only for models with electric drive),
- Futaba R2104GF S-FHSS/FHSS-2.4GHz (4-channel, power supply 4.8–6.0 V, not for HV servos),
- Futaba R304SB T-FHSS-2.4GHz with telemetry on the S.BUS2 bus (4-channel),
- Futaba R304SB-E T-FHSS-2.4GHz with telemetry on the S.BUS2 bus (4-channel, only for models with electric drive),
- Futaba R334SBS T-FHSS SR/T-FHSS 2.4GHz with telemetry on S.BUS2 (4-channel),
- Futaba R334SBS-E T-FHSS SR/T-FHSS 2.4GHz with telemetry on the S.BUS2 bus (4-channel, only for models with electric drive),
- Futaba R404SBS F-4G 2.4GHz with telemetry on the S.BUS2 bus (10-channel),
- Futaba R404SBS-E F-4G 2.4GHz with telemetry on the S.BUS2 bus (10-channel - channels 5–10 on S.BUS2, only for models with electric drive),
- Futaba R2006GS S-FHSS in Normal mode (6-channel),
- Futaba R2008SB S-FHSS in Normal mode (8 channels, 6 channels used),
- RA-42 in Mini-Z mode (4 channels),
- RA-51 in Mini-Z mode (4 channels),
- RA-53 in Mini-Z mode (4 channels).
Compatible telemetry sensors:
- temperature sensor (SBS-01T),
- temperature sensor (SBS-01TE),
- tachometer with magnetic sensor (SBS-01RM),
- tachometer for AC motors (SBS-01RB),
- voltage sensor (SBS-01V),
- current sensor (SBS-01C),
- MC/Acuvance – engine speed, controller temperature, engine temperature (for selected engines), drive battery voltage (requires S.BUS adapter SBM-1/OP-15127)
Package contents:
- Futaba T6PV 2.4GHz transmitter,
- R404SBS receiver,
- APA eccentric steering wheel adapter (medium),
- steering wheel angle insert 5°,
- large steering wheel 54 mm,
- steering wheel range adapter 32°,
- 2 different brake levers (one of which is mounted on the transmitter),
- 3 Allen keys,
- operating instructions.
