Mr. Primer Surfacer 1000 - Spray Sealant 170ml

Liquid sealant spray for fine binding and unifying the surface of a plastic model before painting. The product line comes with either a spray bottle to spray gun or an aerosol. Apply a thin layer to dry and grease-free surface model.

The products are labeled according to the coarseness of the grain:

Mr. Surfacer 500 coarser grain
Mr. Surfacer 1000 finer grain
Mr. Surfacer 1200 finest grain

Use Mr. Surfacer 500 for primary cementing and Mr. Surfacer 1000 for fine binding and final unification surface. The finest and smoothest grain surface features Mr.Surfacer 1200, also supplied in aerosol. For sealing joints and uneven places locally brush to apply the model in several layers. Do not dilute. When dry sanding with fine sandpaper under water roughness 800-1000. If potřebycelý repeat the process. For fine bonding spray gun or an aerosol spray. In the case of dilute spray gun according to the needs of Gunze thinner Mr.COLOR THINNER. Recommended dilution is 1.5:1 to 2.5:1 (volume, Thinner sealant). Do not use other solvents!

Properly sprayed surface is satin-matt, smooth, light gray. A thin layer of sprayed Mr.Surfaceru highlighted nedotmelená place, sinks, scratches and surface irregularities. This place Sand with fine sandpaper under water and repeatedly respray. Repeat as necessary. Before the final spray paint respray the whole model with a thin layer Mr.Surfaceru 1000 for the unification of the surface. The treated surface can be rozleštit to a high gloss, which is especially important when applying color Mr.Metal Color. For polishing, use fine emery paper or cloth grit 4000, and polishing felt. You can also use polishing paste.