Product inquiry
Raven DT 1550mm ARF (Red/Black)
Goods code: AJ0013RB
Raven DT 1550mm ARF (Red/Black)
| Price in e-shop with VAT: | 548,77 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a question-
Product Description
-
Technical Data:
Product Description
AJ Aircraft AJ0013RB - Raven DT 1550mm ARF (Red/Black)
ARF kit of a 3D aerobatic special with a 1550 mm wingspan, designed for a 1400–1600W brushless electric motor powered by a 5S–6S LiPo battery. Very lightweight construction made from parts reinforced with Kevlar and carbon. Includes many carbon parts. This is the version with a trapezoidal wing.
Fuselage
The model's fuselage features a traditional construction made from laser-cut plywood and balsa parts reinforced with Kevlar and carbon. The removable fiberglass motor cowl and removable upper fuselage section with canopy provide convenient access to the power system and RC equipment. The motor is mounted at the rear on a plywood box mount.
Wings
The two-piece wing, with a symmetrical airfoil and trapezoidal planform (the halves slide onto a carbon tube joiner from the side and are secured with screws), is also of traditional construction, with a rigid all-balsa sheeting. The large ailerons are operated by 2 independent servos. The wingtips can be fitted with the supplied SFG winglets.
Tail surfaces
The tail surfaces are of all-balsa construction. The horizontal stabilizer is one-piece, with the stabilizer glued into the fuselage. The elevator and rudder are operated by servos mounted in the rear section of the fuselage, using short, direct pushrods.
Covering
The entire model is covered with Ultracote iron-on film, a trademark used in the USA for the well-known Oracover films.
Landing gear
The landing gear is a taildragger type, with carbon main legs, lightweight wheels with fiberglass fairings, and a wire tailwheel with a carbon bracket linked to the rudder.
Power system and RC equipment
To power the model, you will need a 1400–1600 W brushless electric motor (e.g. Kavan PRO 5050-515) and an 80–100A speed controller, powered by a 5S–6S LiPo battery with a capacity of 3300–4000 mAh and a discharge rating of at least 40C.
For controlling the model, a computerised RC system with at least 4 channels and the ability to program dual rates and exponential rates to the appropriate settings will be suitable. This is absolutely essential for precise flying and 3D aerobatics.
Fast, powerful mini-size servos are suitable (e.g. Kavan GO-1035MG, etc.).
Package contents
The package contains a fuselage, wing and tail surfaces covered with iron-on film, a painted fiberglass motor cowl, a complete set of accessories, carbon landing gear, a tailwheel, lightweight wheels and instructions.
Technical Data:
| Wingspan [mm] | 1550 |
| Length [mm] | 1524 |
| Controlled functions | S, V (2), K (2), M |
| Build difficulty | S2 |
| Pilot skill level | P3, P4 |