Product inquiry
Laser 230z 1,85m ARF (red)
Goods code: AJ0005R
Set availability monitoring
Laser 230z 1,85m ARF (red)
Goods code: AJ0005R
Laser 230z 1,85m ARF (red)
| Price in e-shop with VAT: | 675,82 € |
| Temporarily unavailable | |
|
|
Send a question
on availability |
|
Send a question
on availability |
|
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
#Chcete dostat upozornění ve chvíli, kdy produkt bude k dispozici? Stačí vyplnit formulář a náš hlídací pes Vám dá vědět.
-
Product Description
-
Technical Data:
Product Description
AJ Aircraft AJ0005R - Laser 230z 1,85m ARF (red)
ARF kit of a 3D aerobatic special with a wingspan of 1854 mm, designed for a 35–40 cc petrol engine or a brushless electric motor with an output of at least 2500 W, powered by an 8S LiPo battery. Very lightweight construction made from parts reinforced with Kevlar and carbon, with many carbon components.
This sport-scale aerobatic aircraft is designed for experienced pilots who want to fly both classic and extreme 3D aerobatics.
The model's fuselage is of conventional construction, made from laser-cut plywood and balsa parts reinforced with Kevlar and carbon. The removable fibreglass engine cowl and removable upper fuselage section with cockpit provide excellent access to the power system and RC equipment. The engine is mounted in a rear mount on a plywood box bed.
The two-piece wing with a symmetrical airfoil (the halves slide onto the carbon tube joiner from the sides and are secured with screws) is also of conventional construction, with a rigid all-balsa skin. The large-area ailerons are controlled by 2 independent servos. The supplied SFG wingtips can be fitted to the wing ends.
The tail surfaces are of lightweight all-balsa construction; the horizontal stabilizer is a single piece glued into the fuselage. The elevator halves are controlled by servos mounted in the rear fuselage, using short, direct pushrods. The rudder can be controlled either by pull-pull cables with a servo mounted in the cockpit area, or by a servo mounted in the tail with a short wire pushrod.
The entire model is covered with Ultracote iron-on film (the trade name used in the USA for the well-known Oracover films).
The landing gear is of the taildragger type, with carbon main legs, wheels with fibreglass covers, and a wire tailwheel strut with a carbon bracket linked to the rudder.
For power, you will need a 30–40 cc petrol engine or a brushless electric motor with an output of at least 2500 W and an ESC rated for at least 100 A. Power is supplied by an 8S LiPo battery with a capacity of 4000–5000 mAh and a 40C discharge rating.
To control the model, a computerised RC system with at least six channels is suitable, allowing precise adjustment of the “paired” servos and programming of dual rates and expo with the correct values.
Fast, powerful servos in standard size are suitable – e.g. Hitec HS-7955TG, D954SW, etc.
Package contents
The package contains a fuselage, wing and tail surfaces covered with iron-on film, a painted fibreglass engine cowl, a complete set of accessories, carbon landing gear, tailwheel strut, wheels and instructions.
Warning: Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aircraft (conventional model aircraft, multirotors, drones) weighing more than 250 g or carrying a camera or other sensor capable of capturing personal data in any way are required to register (in the Czech Republic, with the Civil Aviation Authority). Further information is available here: Registration of operators and pilots.
Technical Data:
| Wingspan [mm] | 1854 |
| Length [mm] | 1778 |
| Weight [g] | 4500–5000 |
| Controlled functions | S, V (2), K (2), M |
| Build difficulty | S2 |
| Piloting difficulty | P4 |