RC rychlostní člun Rowing H10 2.4GHz RTR

The fully assembled RC model of the Rowing H10 speed boat reaches a maximum speed of up to 30 km/h! This robustly built boat is easy to control and has several useful features that will make it a great fun for both adults and children.

The boat is equipped with an alarm warning of a weak steering signal and also an indication of low drive battery voltage - so you will always return to shore on time!

The remote control operates at a frequency of 2.4 GHz, which allows multiple boats to be operated simultaneously without interfering with each other. Simply put the boat in the water and it will automatically pair with the remote control.

The 3.7 V Li-Ion drive battery with a capacity of 500 mAh provides enough energy for up to 15 minutes of driving. The battery is charged via a USB charging cable, and the time required to recharge the battery is approximately 2 hours.

Features:

• a completely finished model equipped with all electronics and a power unit;
• the boat is powered and maneuvered by two propellers;
• alarm warning of low drive battery voltage and risk of loss of control signal;
• fully proportional (continuous) speed and direction control.

Durable hull

A great advantage of the model is the well-thought-out and compact hull design, which allows the model to be operated safely even in relatively shallow waters.

Warning safety features

Two safety functions will alert you in time to the imminent loss of the control signal or too low a voltage in the drive battery - so you can put worries about possible loss of the model behind you!

USB charging cable

The drive battery can be charged via the included USB charging cable. You can use your smartphone charger, power bank, computer, or car outlet as a power source.

Package contents:

• 1× RC speed boat Rowing H10 2.4GHz RTR,
• 1× Li-Ion battery 3.7 V with a capacity of 500 mAh,
• 1× 2.4GHz remote control,
• 1× USB charging cable,
• 2× spare propeller,
• 1× set of stickers,
• 1× instructions.

Need to purchase:

• 2× AA batteries to power the transmitter.