Yak-11 Red/White - Engine Cowling
unavailable
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 347,95 € |
| Temporarily unavailable | |
|
|
Send a question
on availability |
|
Send a question
on availability |
|
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
#Chcete dostat upozornění ve chvíli, kdy produkt bude k dispozici? Stačí vyplnit formulář a náš hlídací pes Vám dá vědět.
The kit includes an almost-ready-to-fly EPP Yak-11 model with a 1450 mm wingspan, brushless motor, speed controller and servos. The ailerons, flaps, rudder, elevator and retractable landing gear are controlled.
The model fuselage is made of EPP foam molded in a negative mold. The compartment for the power battery and receiver is located beneath the removable upper fuselage section. The two-piece wing with a semi-symmetrical airfoil, joined by a plywood spar, is also made of EPP foam. The ailerons and slotted flaps are controlled by short, direct pushrods via two pairs of servos mounted in the wing.
The tail surfaces are made of EPP foam and attached to the fuselage with screws. The control surfaces are operated by servos mounted in the rear of the fuselage. The servos are connected to the control surfaces by wire pushrods. The landing gear is a two-wheel electric retractable type. The tailwheel is steerable and linked to the rudder.
All servos are digital with metal gears. The ailerons and flaps are operated by 12g servos, while the rudder and elevator use 19g servos. The installed motor is a BL5052 KV410-size outrunner with an 80A Hobbywing speed controller and a 5V/8A UBEC. An APC 17" propeller is included.
Package contents
The package contains an EPP foam fuselage with the motor installed, an EPP wing with the aileron and flap servos and retractable landing gear installed, EPP tail surfaces, wing joiner, small scale accessories, APC 17" propeller, a screw set and instructions.
Required to purchase separately
To control the model, you will need at least a 6-channel RC system if you leave the model in its default configuration, where both aileron servos, both flap servos and both retractable landing gear units are connected to a single receiver channel. If you want to retain independent control of the servos for these functions, you will need at least a 9-channel RC system. To power the model, you will need a 6S 22.2 V LiPo battery with a capacity of 5000 mAh and a discharge rating of at least 30C. The cable to the speed controller in the model is fitted with an EC5 connector.
| Wingspan [mm] | 1450 |
| Length [mm] | 1300 |
| Building difficulty | S1 |
| Piloting difficulty | P1 |
2 items
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.