DO-27 Zámek křídla
unavailable
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 327,46 € |
| Temporarily unavailable | |
|
|
Send a question
on availability |
|
Send a question
on availability |
|
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
#Chcete dostat upozornění ve chvíli, kdy produkt bude k dispozici? Stačí vyplnit formulář a náš hlídací pes Vám dá vědět.
The Dornier DO-27 was a German single-engine utility aircraft manufactured by Dornier GmbH (later DASA Dornier and Fairchild-Dornier). It was a conventionally designed high-wing aircraft with fixed tailwheel landing gear and very low runway length requirements for takeoff and landing. The kit includes an almost-ready-to-fly model equipped with a brushless motor, speed controller and servos. Ailerons, flaps, rudder, elevator and motor speed are controlled.
The model fuselage is made of EPP foam molded in a negative mold. The compartment for the power battery and receiver is located under the removable lower fuselage section. The two-piece wing with a semi-symmetrical airfoil, joined by a carbon-fiber tube spar, is also made of EPP foam. The ailerons and flaps are controlled by short, direct pushrods connected to two pairs of servos mounted in the wing. LED navigation lights are installed under plastic covers on the wingtip and rudder.
The EPP foam tail surfaces are attached to the fuselage with screws. The control surfaces are operated by servos mounted in the fuselage, connected to them by wire pushrods with angled control horns. A separate servo mounted in the rear of the fuselage operates the tailwheel. The landing gear is a two-wheel wire type and features a steerable tailwheel.
All servos (7 in total) are 9g digital servos with metal gears. The installed BL4250 KV700 outrunner motor is controlled by a Hobbywing 50A speed controller. A 13×6" wooden propeller is included.
Package contents
The package contains the EPP foam fuselage, wing and tail surfaces, wing joiner, 13×6" wooden propeller, small scale accessories, a screw set and instructions. The model is equipped with a power system, servos and speed controller.
Required to purchase separately
To control the model, you will need at least a 5-channel RC system if you leave the model in its default configuration, where both aileron servos, flap servos and the rudder and tailwheel servos are connected to a single receiver channel. If you want to retain independent control of the servos for these functions, you will need at least an 8-channel RC system. To power the motor and onboard electronics, you will need a 4S 14.8 V LiPo battery with a capacity of 3000–5000 mAh and a discharge rating of at least 25 C. The cable to the speed controller in the model is fitted with an EC3 connector.
| Wingspan [mm] | 1600 |
| Length [mm] | 1234 |
| Weight [g] | 2600 |
| Building difficulty | S1 |
| Piloting difficulty | P1, P2 |
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.