FOX 2300 ARF

MDM-1 Fox is a two-seat version of the Polish glider aerobatic Swift S-1 designed for aerobatics training. Compared Swift has an extended hull and enlarged range; regarding the permitted "géček" is the solo occupancy limit in just a "close call" lower (+9 /-6G versus +10 / -7.5 G). S Fox flies and Czech national team - and now with "electrified" semi-scale of this elegant machine will be able to fly too!

Our FOX 2300 made of almost unbreakable extruded expanded polypropylene (EPP) pushes the limits of this technology. While far from the usual semiscales EPP with a wingspan of about 1.5-2 meters or less, our FOX boasts a wingspan 2300 mm! Large size, attractive appearance, pleasant flying characteristics - the ideal holiday model for anyone who has already mastered piloting school models such as Alpha 1500 Beta 1400 ... In addition to decent performance in thermals is the main advantage of Fox's ability to reliably zalétnout basic aerobatic maneuvers; please you even when flying on a slope under milder conditions - there is at home!

The hull model of EPP foam comes fitted with a brushless motor with rotating case (CD4108, a performance between 2808 and AXI AXI 2814), folding propeller, mounted with alternating control and rudder and elevator servos. In front of the fuselage under its large removable canopy is a space for batteries and on-board electronics. Fox Pro, you will need Li-poly tříčlánky at least 1600 mAh á 20C, but "can carry" greater tříčlánky 1800-2600 mAh with which appropriately extended duration. The horizontal tail of EPP for easy transport and storage removable - fitted to the fuselage with two screws. The wing also made of EPP foam is a two-piece, pushing the side of the tube carbon tube. The ailerons are dominated by two servos stored in the wing. Before connecting rods recommend the helm of "motion" repeated careful deflecting up and down respectively. left and right. Landing gear consists of single-track chassis with half zapuštěmým main wheel and a small tail wheel. Controlled by the ailerons, rudder, elevator and motor speed. Model is an elegant blue-white color, you can easily "read" Fox's position in the air - in the normal position even upside down!

To control the model you need at least a four-channel radio system, such as CADET 4 2.4 GHz. In this case both the aileron servos involved using the Y-cable (included in kit) into one channel. When connecting the receiver, refer to the instruction manual of your RC kit. Ideally, if you have at least a five-channel computer radio system that allows independent control of the aileron servos. In that case, you can set aileron differential, for starters, we recommend 50% - that is the down aileron deflection is half the upward deflection. Especially for easier landing on a slope is advantageous aileron mix as airbrakes (vyklápějte is up).

FOX 2300 is designed for intermediate modelers who have mastered the piloting model controlled by the ailerons. You will learn the proper control model of coordinated rudder, ailerons and elevator as set larger variations you can get down to the basics aerobatics - loops, stall turns and Wingover turns, rolls ... that's for you no problem!

ARF kit includes: ready-made model with brushless motor, speed controller and 4 servos, contact adhesive EPP, instructions for building.

Span (mm) 2300
Length (mm) 1265
Wing area (dm2) 40
Weight (g) of 1350
Function S, V, K (2), M
Difficulty S1/P2
Drive and RC equipment:

Long acrobat polétání
Motor * CD4108 * CD4108-1000-1000
Controller * AC 30A * 30A AC
* Folding Propeller 12x6 '* 12x6 folding "
Gens Battery 11.1 V 2200 mAh Gens 11.1 V 2600 mAh
4x micro servos *