Model fighter of expanded polystyrene with a blower 64mm in diameter brushless motors. Equipped with 5 servos, 35A brushless controller and motor blower. Wingspan 715 mm.
Semi American fighter aircraft F-35 Lightning II, as well as other models from the "jets" FMS is a neat model of polystyrene foam suitable for recreational vydovádění advanced pilot who has experience with small and fast machine.
"Jets" FMS are ideal models "on the back seat of the car", easily transportable and does not require expensive batteries or super RC kit - you do not even have a paved runway.
The whole model is composed of parts from parts made of expanded polystyrene molded into a negative mold. The ARF kit model getting nearly finished with sprayed cover-mounted blower with a diameter of 64 mm brushless motor C2627-4100, 35 A regulator and five 9 g servos. According to an illustrative pictorial instructions are very simple construction and reliably it can handle even less experienced "pinsetter." Simply just stick the nose cone, glue the wing and tail surfaces, stick a few Scale Detail, deploy the landing gear, mounted and plug the receiver and insert the drive battery. The chassis is easily removable so you can adjust the model during the time of take-off and landing from his hand on his stomach in the grass or on the contrary, take-off and landing on the asphalt track. Controlled by the ailerons and elevator (each with two servos with short straight wire rods), bow leg and engine speed.
To control the model you need at least a four-channel RC set with a small receiver. The drive will serve three-cell propulsion Li-poly battery ca 1200-1300 mAh with a load capacity of at least 25C or more. The speed controller can be programmed using the card for regulators RAY.
Kit includes: painted moldings fuselage, wings and tail installed with blower motor, controller and servos, chassis with wheels, Scale details, contact adhesive for construction and repair of combat damage and image guidance.
Size [mm] 715
Length [mm] 960
Weight [g] 640
Controlled functions V (2), K (2), M, bow leg
Building intensity of S1
Difficulty piloting P2, P3
Recommended drive and RC equipment:
Fighter
Motor * CD2627-4100
* Brushless Controller 35A
RAY G2 Battery 1200 mAh 11,1 V
Blower * 64 mm
* 5x Servos 9 g
RC kit min. 4 channels
*) Included in the kit
