FOX 3000: Canopy
unavailable
Customer line 9 am - 6 pm: +420 774 590 258 | Do you need help?
| Price in e-shop with VAT: | 532,38 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a questionThe MDM-1 Fox is a two-seat version of the Polish Swift S-1 aerobatic glider, designed for aerobatic training. Compared to the Swift, it has a longer fuselage and greater wingspan; as for the permitted G limits, the limit in solo configuration is only slightly lower (+9/-6 G compared to +10/-7.5 G). The Czech national team also flies the Fox. Now you too can take this electrified semi-scale model for a spin in its modernized version, featuring flaps and redesigned rudder controls!
The FOX 3000 by FMS, made from virtually indestructible extruded expanded polyolefin (EPO), pushes the boundaries of what this technology can do. Until now, EPO semi-scale gliders typically had wingspans of around 1.5–2 metres or less, but the new FOX boasts a wingspan of 3000 mm!
Large dimensions, attractive looks and excellent flight characteristics – simply an ideal large recreational model for anyone who has already mastered flying two-metre EPO gliders. Besides its good thermalling performance, the FOX's main strength is its ability to perform basic aerobatic manoeuvres reliably. It is also a pleasure to fly on a slope, where it feels right at home!
The EPO foam model fuselage comes with a brushless outrunner motor installed (C4258-KV460), a folding 15×7.5“ propeller, a 60A brushless speed controller and rudder and elevator servos. The front section of the fuselage, beneath the large removable canopy, houses the battery and onboard electronics. The FOX requires a 6-cell 5000 mAh LiPo battery rated at 35C. The rudder is controlled by a servo housed in the fin, while the elevator servo is housed in the horizontal stabilizer.
The entire rear fuselage section is removable for easy transport and storage – it attaches to the front fuselage section using a tubular connector and bayonet latch. The two-piece wing slides on from the side onto a tubular carbon-fibre joiner. The ailerons and flaps are each controlled by two servos housed in the wing. The landing gear consists of a single-track undercarriage with a partially recessed main wheel and a small tailwheel. The ailerons, flaps, rudder, elevator and motor speed are controlled.
You will need at least a six-channel RC system to control the model – in this case, both aileron servos and both flap servos are connected to a single channel using Y-cables (included in the kit). Follow the instructions for your RC system when connecting the receiver.
Ideally, you should have at least a seven-channel computer RC system that allows independent control of the aileron and flap servos. This lets you set aileron differential. We recommend starting with 50% differential. The downward aileron deflection is half the size of the upward deflection. Mixing the ailerons to act as airbrakes (deflecting them upwards) is especially useful for easier slope landings.
Package contents
The package contains a completed model with a brushless motor, speed controller, six servos and assembly instructions.
| Wingspan [mm] | 3000 |
| Length [mm] | 1873 |
| Weight [g] | 4700 |
| Wing area [dm2] | 74,4 |
| Controlled functions | S, V, K (2), M, F (2) |
| Building difficulty | S1 |
| Pilot skill level | P2, P3 |
| Aerobat | |
| Motor | * C4258-460 |
| Speed controller | * Brushless 60 A |
| Propeller | * Folding 15×7,5" |
| Battery | FOXY 22,2 V 5000 mAh |
| Servos | * 6× mini |
| RC system | Min. 6 channels |
| *) Included in the ARF set | |
9 items
This website is using cookies
In order to improve our services, we use cookies on this website. For more information go to Terms and conditions for use of website.