Product inquiry
Pitts V2 1400mm ARF
Goods code: 4ST17040-A
Pitts V2 1400mm ARF
| Price in e-shop with VAT: | 368,44 € |
|
Stock
Tuesday 24.11. you can have it at the Nademlejnská central store Wednesday 25.11. it can be at your place |
|
|
|
Buy |
| Buy | |
|
35 years in business = safe shopping and professional service |
|
Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
Send a question-
Product Description
-
Technical Data:
Product Description
FMS 4ST17040-A - Pitts V2 1400mm ARF
ARF set of an aerobatic aircraft with a 1400 mm wingspan, made of durable EPO foam, with a C4258-460 brushless motor, 50A ESC and 4 servos. Working ailerons, rudder and elevator. The model can be powered by a 6S LiPo battery with a capacity of 4000 mAh.
When Curtis Pitts designed and built a small aerobatic biplane in 1943 and 1944, he could hardly have imagined that he was creating a legendary aircraft that would dominate competitions in most of the world for decades and still be in production today. And not just in factory production, but also as home-built aircraft from factory-prepared kits or plans. Its heyday was in the 1960s and 1970s, when these tiny aircraft competed against our Zlíns at aerobatic championships. The arrival of the Zlín “Fifty” and later other finely developed aerobatic aircraft brought an end to the Pitts’ success in the Unlimited category, but they still score well in the lower classes. However, in terms of elegance of appearance and flight performance, today’s aerobatic aircraft do not come close to the Pitts—not even to the bottom edge of the aerodynamic wheel spats on its landing gear.
The new Pitts Special, beautifully detailed as a scale model, takes EPP aerobatic models up another class. Where once we would have had a glow engine “.60”, now a brushless motor powered by a six-cell LiPo battery purrs along happily!
The EPO foam fuselage is supplied with a factory-installed brushless outrunner motor (C4258-460) and a 15×9" propeller. A 50A brushless ESC with a powerful switching BEC, as well as the rudder and elevator servos, are also installed in the model. Easy access to the onboard electronics and flight battery is provided by the removable canopy with a magnetic lock.
The semi-symmetrical EPO foam wings are in two sections and joined with carbon-fibre tube connectors. The lower wing is attached to the fuselage from below with screws, while the upper wing is supported by a system of struts and is also secured to the struts with screws. The interplane struts have mechanical latches for easy assembly and disassembly. The ailerons are controlled by two servos housed in the wing. The ailerons on the lower and upper wings are connected by wire linkages. Before connecting the linkages, we recommend freeing up the control surfaces by carefully moving them repeatedly up and down, or left and right.
The tail surfaces are made of EPO; the rudder and elevator are controlled by servos housed in the cockpit area using wire linkages. The landing gear is made of wire with plastic fairings, and the tailwheel is steerable and linked to the rudder.
The model requires a 6S LiPo battery with a capacity of 3700–4000 mAh and a discharge rating of at least 35C. You can also use two 3S LiPo batteries connected in series. To control the model, you will need at least a four-channel RC system. Owners of multichannel computer radios that allow individual adjustment and fine-tuning of the aileron servos will of course have an advantage.
Package contents
The package contains an almost-ready-to-fly model with a brushless motor, propeller, 50 A ESC, 4 servos, a set of small accessories and instructions installed.
Warning
Under Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of unmanned aircraft systems, and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned aircraft, operators and pilots of unmanned aerial vehicles (conventional model aircraft, multicopters, drones) weighing more than 250 g or carrying a camera or other sensor capable of capturing personal data in any way are required to register (in the Czech Republic with the Civil Aviation Authority). Further information is available here: Registration of drone operators and pilots.
Technical Data:
| Wingspan [mm] | 1400 |
| Length [mm] | 1298 |
| Weight [g] | 3500 |
| Wing area [dm2] | 48,3 |
| Controlled functions | S, V, K (2), M |
| Building difficulty | S1 |
| Piloting difficulty | P3 |
Recommended power system and RC equipment
| Motor | *) C4258-460 |
| ESC | *) Brushless 50A |
| Propeller | *) 15×9“ |
| Battery | FOXY G3 22,2 V 3700 mAh |
| Servos | *) 4× 17g |
| RC system | Min. 4 channels |
| *) Included in the ARF set | |