SKY RC B6 neo 2 nabíječ 300W (red/blue)

The SKY RC B6neo2 300W miniature charger was designed to provide everything needed for high-current charging, with simple operation, in a size "half a palm" or "in a vest pocket". B6neo2 allows you to charge and discharge common types of cells (NiCd, NiMH, Li-poly, Li-ion, Li-Fe, Li-HV, Pb), in addition, it is equipped with a built-in six-channel balancer, which ensures very safe and comfortable charging of lithium batteries. It can also operate in regulated power supply mode with an output voltage adjustable in the range of 5-27 V and a current of 1-15 A.

The intelligent software offers common functions and is designed for practical users who purchase the charger to charge batteries:

• program for new types of "high-voltage" lithium batteries LiHV with a final charging voltage of up to 4.35 V
• setting the final voltage for charging and discharging for lithium batteries (allows for gentler charging, which pilots like, or, conversely, brutal overcharging, which "car enthusiasts" love)
• programs for charging maintenance-free lead-acid AGM batteries and charging lead-acid batteries at low temperatures
• measurement of total voltage and voltage of individual cells (for lithium batteries) even outside charging/discharging
• measuring the internal resistance of the entire set and individual cells (for lithium batteries)

Overview of basic functions and parameters

• Input supply voltage 10 - 28 V DC (to fully utilize the charger's power, the power supply should provide a voltage of at least 24 V) when powered from a battery or mains stabilized power supply or 12-20 V when powered from a USB source (PD3.0/QC)
• For charging and discharging 1 – 15 NiCd/NiMH cells, 1 – 6 Li-ion/Li-poly/Li-Fe/LiHV cells or 6/12 V lead-acid batteries
• Adjustable charging current 0.1 A - 15.0 A
• Adjustable discharge current (0.1 A – 2.0 A)
• Max. charging power 300 W when powered from a mains adapter or car battery or 80 W when powered from a USB-C source (PD3.0/QC)
• Max. power for discharge 24 W
• End of charging using automatic delta-peak for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current/constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charge/discharge or discharge/charge for NiCd and NiMH batteries, up to 5 cycles
• Three charging modes for lithium batteries - normal charging, balancing charging and storage charging/discharging
• Three charging modes for lead-acid batteries – for normal lead-acid “car batteries”, for lead-acid AGM batteries (batteries with electrodes separated by a separator made of glass fibers impregnated with electrolyte) and for charging lead-acid batteries at low temperatures (-20°C to +5°C).
• Charging stops when the set time or the delivered charge is exceeded
• Measurement of total voltage of the pack and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• Backlit LCD display with simple and clear menu and display of parameters during charging/discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect output polarity, etc.
• Protection against polarity reversal and short circuit at the output.
• Fan for forced cooling.
• Compact plastic box, miniature dimensions

The charger is equipped with an XT60 output socket and a universal socket for JST-XH service connectors, allowing you to directly connect the battery power cables and JST-XH service connectors of 2-6S kits - if you use kits with XT60 and JST-XH connectors, you can do without charging cables and adapters. To connect the service connectors of other systems, you can use standard Sky RC or RC System adapters.

Note: When charging lead-acid batteries, the charger has an adjustable final voltage of 2.30-2.75 V/cell - for this reason, it is (with the correct setting corresponding to the type of battery being charged) suitable for charging all types of lead-acid batteries, including gas-tight gel batteries, which must not be charged to more than 2.30 V/cell.

The charger kit includes: B6neo2 charger, instructions.