R12F receiver

The Radiolink R12F 2.4GHz is a 12-channel FHSS frequency hopping receiver without telemetry compatible with the Radiolink T12D and T16D transmitters. It offers four operating modes:

• with standard PWM signal servo outputs (12 PWM channels on outputs CH1–12)
• with S.BUS serial output and PWM channels (11 PWM channels on outputs CH1–11 + S.BUS on CH12)
• with S.BUS serial output, CRSF input and output and PWM channels (9 PWM channels on outputs CH1–9 +CRSF (RX) on CH10/CRSF (TX) on CH11 + S.BUS on CH12)
• with CRSF input and output and PWM channels (10 PWM channels on outputs CH1–9 and CH12 +CRSF (RX) on CH10/CRSF (TX) on CH11)

The receiver is suitable for models of all categories - the manufacturer's stated range is up to 4000 m in the air (under ideal conditions, without interference).

The use of FHSS transmission technology provides high resistance to interference and the ability to set emergency deviations (fail-safe) in the event of a failure or strong interference of the transmitter signal.

Pairing with the transmitter is done using the pairing button on the receiver, operating states are indicated by an LED.

The receiver is equipped with contact strips for standard UNI connectors (=JR/Graupner, Hitec, Futaba); the terminals are oriented in the direction of the longitudinal axis of the receiver.

The operating voltage range of 3–12 V allows operation with power from 1–2S LiPo/Li-ion, 2S LiFe, 4–8 cell NiMH or 5–12 V BEC stabilizers.

The receiver has updatable firmware (via USB-C socket).

The receiver kit includes: R12F receiver, instructions.