FOXY 6A UBEC

Product no longer available for order

We're sorry, but the product is no longer available for sale. Browse similar products sold in the category:

Manufacturer:	Kavan
Goods code:	1RC21515
EAN:	8595241345871

Don't know how to choose? Are some parameters not clear to you? Write us your question and we will contact you with an answer.
#Chcete dostat upozornění ve chvíli, kdy produkt bude k dispozici? Stačí vyplnit formulář a náš hlídací pes Vám dá vědět.

Product Description

Kavan - FOXY 6A UBEC - 1RC21515

Switching Regulator Power BEC 6A (10A peak) to power the receiver and servos. Supply voltage 6-25V (2-6S LiPo) Output voltage switchable 5.0, 5.5, or 6.0 V. Weight 18 grams, Dimensions 45x23x10mm.

Switching Regulator Power BEC to power the receiver and servos, who finds great application:

models with electric drive with speed control OPTO
in models of gliders and models with an internal combustion engine, which is a classic receiver NiCd / NiMh 4 - or 5-part replaced dvoučlánkem Li-poly or Li-Fe
electric flying, the regulator is not sufficiently powerful built-in BEC for more (thicker, digital, etc.) serv
The use of advanced components and circuitry ensures optimized to minimize interference RC sets with low weight and small dimensions of the stabilizer. Supply voltage range 6-25 V allows UBEC to use the šestičlánkovým Li-poly battery. Output voltage (5.0 V, 5.5 V or 6.0 V) is optional with shorting jumper. Operating status is indicated by LED.

UBEC is equipped with protection against reverse polarity (with incorrect polarity UBEC does not work).

USE UBEC

Electric motor with OPTO controller: UBEC connect directly to the output of the drive battery and UBEC output connector into the socket for the battery (or other free servozásuvky) on the receiver.
Model internal combustion engine or glider UBEC connect directly to the output power and battery output UBEC connector into the socket for the battery (or other free servozásuvky) on the receiver.
Electric motor with controller with built-in stabilizer power supply (BEC) before the UBEC must disconnect the red wire (+) in servokablíku controller to drive out the built-in BEC function. Wiring is UBEC same as in OPTO controller.

Tip: To reduce possible interference UBEC in the model at a distance of at least 5 cm from the receiver. In models with FM or AM RC sets of 27, 35 or 40 MHz may be suitable output cable UBEC provide noise suppression ferrite ring.

Power: 6 .. 25 V (2-6s Li-po/5-18 NiXX)
Output voltage: 5.0 V/5.5 V/6.0 V switchable
Output Current: 6 A continuous / 10 A peak
Dimensions: 45x23x10 mm
Weight: 18 g