HS-M7990TH superstrong 7.4V servo, magnetic encoder

Extremely powerful standard digital servo for the most demanding applications with titanium gears to the output shaft supported in 2 ball bearings and spindle gears stored in metal sliding bushings. "Achilles heel" of modeling serv - classical mechanical potentiometer sensing the position of the output shaft, which eventually wear out and are suffering from shock and vibration transmitted to the servo replaces contactless magnetic encoder. In addition, it eliminates the risk of damage to the potentiometer during long-term operation under high loads, the magnetic encoder also provides excellent precision position sensing, and increases the accuracy servo to the usual level of industrial installations.

The increased supply voltage (up to 7.4 V, 2s Li-poly/Li-Fe) is very simple to implement on-board electronics with a 2.4 GHz receiver Optima series with the power of dvoučlánku Li-poly or Li-Fe without the need for additional stabilizers or regulators .

12-bit electronics G2, 5 new generation offers advanced programming options including adjustable overload protection. The guarantee of high parameters is also a powerful coreless motor with aluminum heatsink. Servo is especially suitable for giant model airplanes, helicopters (electro 600-700/50-90 asleep.) And RC Car 1:8 and 1:5. Comes with rugged plastic levers filled with carbon fibers.

Hacker digital servos Hitec HFP-10 *, HFP-20, HFP-25, HPP-21 or HPP-21 Plus can be programmed:

• reset to factory defaults
• width of deadband
• Direction of rotation
• speed of rotation
• neutral
• The travel
• on or off, fail-safe
• emergency settings deflection fail-safe
• servos protection against overload (power limitation 0-50% overload)

Note: The servo has switchable resolution as the other "7xxx" servos (a permanently high resolution), but the maximum deflection of 180 ° can be achieved by setting function of deflection / neutral / fail-safe programmer "EPAneuFS".