Titebond III Ultimate water-resistant glue 113 g (4 oz)

Peak water-resistant (meets American ANSI / HPVA Type I) dispersion adhesive with high strength for bonding wood. Titebond III Ultimate is non-toxic, solvent-free adhesive. It forms a light brown color, is easy to sand. It is suitable for bonding wood provnitřní and outdoor use.

When using the modeling ensures high resistance joints wooden structure against moisture and water. Easily applied directly from the application attachment to the bottle, as well as a brush or spatula. With the "open time for bonding" for 10 minutes at room temperature (i.e., the time when it was still on the surface of the adhesive layer there is no lowering of the dry adhesive bond strength) is suitable for bonding the carcass of large dimensions, which appreciate enough time for applying the adhesive to a large area, large ribs, etc. It is ideal for bonding rigid covers in giant aircraft models. And with it you do not have to deal with constantly measuring and mixing as epoxies or solve breathing vapor superglues drádících your airways and wife.

The adhesive starts to gel after 20-25 minutes, the joint has sufficient strength for handling after about 2-3 hours. Full curing of the adhesive occurs after 24 h

The temperature during bonding should not drop below 7 ° C, stored at temperatures below 25 ° C, do not expose to frost.

The bottle is provided with a telescopic extension application, which is releasable so as to allow easy removal of the adhesive as required.

As is tested water resistance ANSI / HPVA Type I

3 pieces of birch veneer dimensions 6x6 "(approx. 15x15 cm) are mutually glued together. After curing the thus formed three-layer plywood is cut into test pieces of dimensions 1x3" (about 2,5 x7, 5 cm). After 4 hours boiled in water, then dried for 20 h in an oven at 145 ° F (63 ° C), again boil 4 hours, rapidly cooled with cold water and tested for wet bond strength which must be greater than the prescribed value.