Electronic control unit that collects data from various telemetry sensors designed for all sensors Hitec. 14 sensor inputs (4 +1 x temperature, 2x speed, GPS, voltage, current, Servo manager, speedometer, altimeter / vario).
Telemetry data logger used to collect data from external sensors (up to 14 sensors) and jejjich transmission to the telemetry receiver Hitec with data input (at the moment Optima Optima 7 and 9). As the name suggests, allows you to use all sensors Hitec models of all kinds - airplanes, helicopters, cars and boats. The panel includes electronics "serving" the individual sensors - is therefore not possible to connect the sensor itself directly to the receiver, but always only through the exchange.
For proper operation it is necessary to check in advance (and where necessary update with HPP-22 software version 1.14 or later) that:
Aurora 9 transmitter software (if applicable) is version 1.09 or later
software transmitter Eclipse 7 Pro (if applicable) is version 1.03 or later
software transmitter module Spectra 24 (or built-in VF part in Eclipse 7 Pro Optic 6 Sport 2.4 GHz, optics 5) is version 3.01 or later
software receiver Optima (7 or 9) is version 2.02 or later
voice output software telemetry HTS-Voice is version 1.04 or later
The panel requires no setup, connects via two cables supplied with it - a cable with twisted multiwire telemetry leads to the DATA input of the receiver, flat cable to provide power to the control panel and sensors (4.8 to 8.4 V). You can connect it directly into an unused servovýstupu receiver. If they are all occupied, then use the Y-cable, or you can bring power directly from the battery switch přijímačového.
In addition to the data output (DATA) and the power connector (P) exchange has fourteen outlets with nezáměnnými connectors for different types of sensors sensors:
G - to connect a GPS sensor
M1 - to connect the speed sensor with pitot tube
M2 - connect Servo Manager
M3 - connect altimeter / variometer
R1, R2 - connection speed sensors
T5 - for connection of sensors measuring the motor temperature
T1, T2, T3, T4 - for connection of temperature sensors
F - for connecting fuel level sensor
C - connect the current sensor
V - for connecting the voltage
You can connect up to two speed sensors, no matter whether magnetic or optical socket number indicates the address to which the sensor appears on the Aurora 9 transmitter display or the computer when connected via HPP-22 to the transmitter module.
Similarly, you can connect up to four + one temperature sensor socket number again indicates the address of the sensor.
When you connect the current sensor is required at the transmitter (or on a connected PC or other telemetry interface) to select the appropriate sensor type (C50 or C200) that was displayed correct current value.
Set telemetry control panel includes: telemetry panel HTS-SS Advance, power cable, data cable and double-sided foam tape and instructions.
Power: 4.8 to 8.4 V (max. 2S Li-poly)
Operating temperature range -20 ° C ~ +60 ° C
Dimensions: 40,4 x28, 4x9, 5 mm
Weight: 8 g without cable, 14 gs cables